User manual ONEFORALL URC 7210

[. . . ] Programme (Channel) +/- Keys These keys operate in the same way as the keys on your original remote. MUTE Key The Mute key operates the same function it did on your orginal remote control. Volume +/- Keys These keys operate in the same way as the keys on your original remote. Number Keys The Number keys (0-9, -/--, AV) provide functions just like your original remote, such as direct access programme selection. [. . . ] If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Before you start, please read these instructions carefully Make sure your device is switched on (not on standby). Press and hold the MAGIC key until the POWER key (LED) blinks twice (the red light (LED) underneath the POWER key will blink once then twice). If your device switches off, the ONE FOR ALL is ready to operate your device. Turn your device back on and try all the remote's functions to ensure they are working properly. If the functions do not work properly, repeat steps 1-4 using another code listed under your brand. If your device does not respond, follow steps 1 to 4 with each code listed for your brand. If none of the codes listed for your brand operate your device, or if your brand is not listed at all, try the search method described on page 7. Write your code in the four boxes provided in the battery compartment and on page 8 for easy future reference. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand. If your device does not respond to the ONE FOR ALL after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL. To search for your TV code: 1 2 Switch your television on (not on standby). Press and hold the MAGIC key until the POWER key (LED) blinks twice (the red light (LED) underneath the POWER key will blink once then twice). Now press CH+ over and over, until your Television turns off (everytime you press the CH+ key the ONE FOR ALL will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the ONE FOR ALL at your Television while pressing this key. important note: - Most TV's do not switch on pressing the POWER key. [. . . ] You may care to visit our Internet-site: Our internet-site has many advantages: - 24 hours access - no waiting time - page for Frequently Asked Questions - info about the ONE FOR ALL product range Before contacting us, by Fax, E-mail or Phone, make sure you have the required information available by filling in the table below. What do we need to know before you contact us: 1 2 3 Device TV That you have the ONE FOR ALL 1 URC-7210. Type/model numbers can often be found in your equipment owner's manual or on the factory plate behind the device. /ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. [. . . ]