User manual ONEFORALL URC 6211

[. . . ] 1 2 3 Remove the battery cover from the back of the ZAPPER by pressing down on the tab. Match the batteries to the +/- marks inside the battery case, then insert the batteries. Important notes: - In order to avoid having to reprogram your ZAPPER after you remove the batteries, you will need to insert new batteries within 5 minutes. [. . . ] If your television does not respond to the ZAPPER after you have tried all the codes listed for your brand, try the Search Method described on page 6. Make sure you write your correct 5 digit code in the boxes provided on this page. If your television does not respond or is not functioning properly with one of the codes, follow steps 1-5 with each code listed for your brand. - If none of the codes listed for your brand operate your television, follow the Search Method described in the next section. The Search Method can be used even if your brand is not listed at all. - Write the code for your TV in the boxes provided below for easy future reference. If your Television does not respond to the ZAPPER after trying all the codes listed for your brand, try searching for your code. Press and hold the MAGIC key until the LED blinks twice (The LED underneath the POWER key will blink once then twice). Next, alternate between POWER and CHANNEL - until your Television turns off. Remember, you must aim the ZAPPER at your device the entire time you are searching for your code. When your device turns off, press and release MAGIC to store the code. Turn your device back on and try all the remote's functions to ensure they are working properly. If some of the ZAPPER'S commands are not operating correctly, try the search method again, you may be using the wrong code. After you have used the Search Method, you can find out which code the ZAPPER responded to by blinking back the code. Remember, you can only blink back your code after the ZAPPER is operating your device. To blink out your TV code: 1 Press and hold the MAGIC key until the red LED blinks twice (the LED underneath the POWER key will blink once then twice). [. . . ] To obtain warranty service during the warranty period, please call us at the number mentioned on the Customer Service page. Please notice that we need your purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes which are not related to your trade, business or profession, please remind that you may have legal rights under your national legislation governing the sale of consumer goods. [. . . ]