User manual ONEFORALL URC 3445

[. . . ] For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Recorder and the SAT key operates your Satellite Receiver or Cable Converter. Number Keys The Number keys (0-9, 10, 20 (AV)) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. [. . . ] If B the functions do not work properly, SAT AX TV VCR CL AUX 4 repeat5 1-5 6 another code listed under your brand. 7If your device does not respond, follow steps 1 to 5 with 8 9 each code listed for your brand. If none of the codes listed 2 3 for your brand operate your device, or if your brand is not A V 10 listed 0 all, try the search method described on page 7. Write your code in the four boxes provided in the battery compartment and on page 10 for easy future reference. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. If your device does not respond or is not funcSLOW VCR tioning properly with one of the codes, try another code listed under your REC brand. - If your device's original remote control does not have a POWER key, press PLAY instead of POWER when setting up your device. - Remember to press the correct device key before operating your device. If your original remote operates more than one device, you need to set up each device separately. REC Devices can be found under the following keys: If your device does not respond to the ONE FOR ALL 4 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 4. The Search MENU MAGIC Method may also work if your brand is not listed at all. Example: To search for your TV code: Switch your television B on (not on standby) and aim your TV VCR CL DVD ONE FOR ALL at your TV. Press and hold down MAGIC until the ONE FOR ALL 4's 6 light blinks twice (The red light will blink once and red Now press CH+ over and over, until your Television turns off (everytime you press the CH+ key the ONE FOR ALL 4 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the ONE FOR ALL 4 at your Television while pressing this key. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. [. . . ] You may care to visit our Internet-site: Our internet-site has many advantages: - 24 hours access - no waiting time - page for Frequently Asked Questions - info about the ONE FOR ALL product range Before contacting us, by Fax, E-mail or Phone, make sure you have the required information available by filling in the table below. What do we need to know before you contact us: 1 2 3 Device TV That you have the ONE FOR ALL 4 URC-3445 universal remote. Type/model numbers can often be found in your equipment owner's manual or on the factory plate behind the device. [. . . ]