User manual ONEFORALL URC 1030

[. . . ] "Universal TV Remote" Overview: Thank you for purchasing the One For All® 1 Device universal remote control. [. . . ] Press and hold SETUP until the One For All® 1 Device's red light blinks twice. Release SETUP. Device 1 Power Key Setup Key 1 2 Feature and Function Red Light (LED) Mute Key 1 2 Look at your TV to find the brand name and write it in the space below: 1 2 SETUP _____________________ Find your TV brand on the RCA 3124 Sony 1111 reverse side of these instructions. Write your codes here: Set-Up Codes How to Enter Codes 3 Channel & Volume Keys Using the example shown on the right, enter the first four-digit code you wrote down. (See "Looking Up Your TV Code". ) If you put in the code correctly, the red light will blink twice. If your TV Press code is: 3 4 POWER Press the battery cover back into place and replace the screw. You will need one of these codes to program your One For All ® 1 Device remote control. 3 1 2 4 3 CH+ 1 VOL VOL 2 CH_ 4 4 POWER Even if your batteries die, the One For All® 1 Device built in memory back-up will save your programmed setup codes. The One For All® 1 Device will also retain the memory for another 10 minutes once you have removed the batteries to replace them. Aim the One For All® 1 Device at your TV and press POWER. If it doesn't, repeat Steps 2-4, trying each code listed for your brand until you find the one that operates your TV. Troubleshooting If you cannot get the One For All ® 1 Device to operate your TV: s Try all of the codes listed for the brand of your TV in the Set-Up Codes section. If your TV responds to some of the commands but causes the wrong results, try all of the codes listed for your brand. [. . . ] One For All ® is designed for compatibility in North America excluding Mexico. URC-1030 08/01 [. . . ]