User manual OMRON ZEN-SOFT01-V4 12-2008
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OMRON ZEN-SOFT01-V4. We hope that this OMRON ZEN-SOFT01-V4 user guide will be useful to you.
You may also download the following manuals related to this product:
OMRON ZEN-SOFT01-V4 01-2006 (3709 ko)
OMRON ZEN-SOFT01-V4 01-2006 (3738 ko)
OMRON ZEN-SOFT01-V4 01-2006 (3727 ko)
OMRON ZEN-SOFT01-V4 01-2006 (3764 ko)
Manual abstract: user guide OMRON ZEN-SOFT01-V412-2008
Detailed instructions for use are in the User's Guide.
[. . . ] Z184-E1-04
ZEN-SOFT01-V4
ZEN Support Software
OPERATION MANUAL
ZEN-SOFT01-V4 ZEN Support Software
Operation Manual
Revised December 2008
Preface
OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual. This manual describes the functions, performance, and application methods needed for optimum use of the ZEN Programmable Relay. The ZEN is a compact and highly functional controller that can be used to easily automate small-scale applications. Its development has drawn on OMRON's advanced control technology and expertise in manufacturing various types of controllers. [. . . ] · Right-click and select Copy.
Section 2-4
When Moving · Click the Cut Button on the Toolbar. · Right-click and select Cut.
3.
Any of the following methods can be used to paste inputs and outputs after moving the cursor to desired position with the mouse or cursor keys. · Right-click and select Paste.
When Copying
When Moving
Note Either the pencil or arrow cursor can be used to copy, cut, and paste individual objects.
31
Editing Ladder Programs
Section 2-4
Copying, Cutting, and Pasting a Specified Range
1, 2, 3. . .
1. Click the Select objects Button on the Toolbar or select Edit(E)/ Select Objects from the Menu Bar.
Note Connection lines cannot be drawn while the Select objects Button on the Toolbar is pressed. To return to normal program edit mode, click the Select Objects Button again or press the Esc Key.
32
Editing Ladder Programs
2.
Section 2-4
Drag the mouse from the start of the range to the end of the range.
3.
Use any of the following procedures for copying and moving.
33
Editing Ladder Programs
Section 2-4
When Copying When Moving · Click the Copy Button on the Toolbar. · Right-click and select Cut.
4.
Any of the following methods can be used to paste inputs and outputs after moving the cursor to desired position with the mouse or cursor keys. · Right-click and select Paste.
When Copying
When Moving
Note A program saved in a ladder program file can be pasted after copying the program and then starting up the ZEN Support Software in a separate window.
34
Editing Comments
Section 2-5
2-4-9
Deleting Rungs
Using either the mouse or cursor keys, highlight the rung that is to be deleted. Highlight the position and then select Edit(E)/Delete Rung from the Menu Bar.
1, 2, 3. . .
2.
The highlighted rung will be deleted, and the next rung will be moved up.
2-5
Editing Comments
The comment edit function is used to display or edit all I/O comments by bit type.
1, 2, 3. . .
1.
Select Edit(E)/Edit Comments from the Menu Bar.
35
Saving Ladder Programs
2. Edit the comment in the Edit Comment Screen.
Section 2-6
Note
1.
Programs are easier to understand and manage if actual I/O device names or names relating to functions are used in the I/O comments. Click the Show Comments Button on the Toolbar or select View(V)/Show Symbol Comments from the Menu Bar to display or not display the I/O comments in ladder view on the screen.
2.
2-6
2-6-1
Saving Ladder Programs
This section describes how to save ladder programs to file.
Saving to File
1. Select the save destination and enter the file name, and then click the Save Button.
1, 2, 3. . .
Note
1.
When saving existing ladder programs that have been edited since they were saved, you can also click the Save Button on the
36
Printing Ladder Programs
Section 2-7
Toolbar or select File(F)/Save(S) from the Menu Bar to overwrite the existing file. The system settings and password set under ZEN/Set Protection will also be saved with the file.
2-6-2
Opening Saved Files
1. Click the Open Button on the Toolbar or select File(F)/Open(O) from the Menu Bar to open saved files. Specify the file location and file name and click the Open Button.
1, 2, 3. . .
2-7
2-7-1
Printing Ladder Programs
Print Settings
This section describes the layout and heading settings that must be made before printing ladder programs.
1, 2, 3. . .
1. Make the settings for each item.
37
Printing Ladder Programs
Setting Program frame display Parameter settings information Explanation
Section 2-7
Check this box to print the print frame. Check this box to print the timer, counter, and other parameter settings. Information will be printed only for portions of the memory areas that are being used. Enter the date the program was written.
Print title Drawing name Figure No. Revision mark Prepared by Date
3.
Click the OK Button to save the settings as the print settings for the ZEN Support Software. Note a) To specify whether I/O comments are to be printed, either click the Show Comments Button on the Toolbar or select View(V)/Show Symbol Comments from the Menu Bar. b) To specify whether a ladder diagram or electrical circuit diagram is to be printed, either click the Ladder rung diagram Button or the Electrical circuit diagram Button on the Toolbar or else select View(V)/Circuit display method/Ladder rung diagram or Electrical circuit diagram from the Menu Bar.
2-7-2
Print Preview
1. Click the Print Preview Button on the Toolbar or select File(F)/ Print Preview(V) from the Menu Bar to check the print layout.
1, 2, 3. . .
38
Printing Ladder Programs
2. [. . . ] ("-V1" was added to the CPU Unit model number. ) Main Changes (See note 2. ) · The number of timers, counters, weekly timers, calendar timers, and display bits was increased from 8 to 16. System Software (See note 1. ) The system software was upgraded to version 3. 0 ("-V2" was added to the CPU Unit model number. ) Main Changes (See note 2. ) · Addition of multiple-day operation and pulse-output operation to the weekly timers · Addition of twin time operation to the timers · Addition of an 8-digit counter and 8-digit comparators · Addition of models with communications (10-point models only) and economy CPU Units · Addition of daylight saving time settings for Australia and New Zealand · Deletion of contrast control ZEN Support Software Changes Applicable from Version 2. 0 (ZEN-SOFT01-V2) · Changed to handle additional display functions. Changes Applicable from Version 3. 0 (ZEN-SOFT01-V3) · Changed to handle the memory area expansion in "-V1" CPU Units. · Changed to handle addition of 20-point CPU Units.
April 2003
January 2006
Support for Version 4. 0 or Higher (ZEN-SOFT01-V4) · Supports CPU Units with enhanced functionality (-V2) · Supports half-sized I/O Expansion I/O Units (-8E1) · When the type of the CPU Unit (the CPU Unit and Expansion I/O Unit configuration) is the same as that specified in the property settings of the Support Software, program transfer is possible even if Expansion I/ O Units are not connected.
Note 1.
"System software" is the software for processing the CPU Unit's program. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OMRON ZEN-SOFT01-V4
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OMRON ZEN-SOFT01-V4 will begin.