User manual OMRON JUSP-NS500 DATASHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OMRON JUSP-NS500. We hope that this OMRON JUSP-NS500 user guide will be useful to you.
You may also download the following manuals related to this product:
OMRON JUSP-NS500 DATASHEET (629 ko)
OMRON JUSP-NS500 DATASHEET (542 ko)
OMRON JUSP-NS500 DATASHEET (648 ko)
OMRON JUSP-NS500 DATASHEET (656 ko)
Manual abstract: user guide OMRON JUSP-NS500DATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] JUSP-NS500
PROFIBUS-DP unit
PROFIBUS-DP connectivity with positioning functionality.
· Connects directly to the Sigma-II series drive · Simplifies distributed control and information management · No programming languages are required. [. . . ] Station address setting Select the address from 0 to 7D (0 to 125) using the rotary switches. Operation specifications Positioning using PROFIBUS-DP communications Reference input PROFIBUS-DP communications Commands: motion commands (position, speed), parameter read/write Acceleration/deceleration method Linear first/second-step, asymmetric, exponential, S-curve Fully-closed control Possible Fixed allocation to SERVOPACK CN1 Forward/reverse run prohibited, zero point return deceleration LS, zero point signal, connector external positioning signal NS500 unit Emergency stop signal Servo alarm, brake interlock, servo ready, positioning completion Servo drive CN1 connector NS500 unit P1, P2 (area signals) Position data latch function Position data latching is possible using phase C, zero point signals, and external signals. Protection Parameters damage, parameter setting errors, communications errors, etc. LED indicators ERR: Module error COMM: Communications status
Item Type Applicable servo drive Installation method Basic specifications PROFIBUS-DP communications Command format
Position control functions Input signals
Output signals Internal functions
Note: *The allocation of the output signals for brake interlock, servo ready, or positioning completion can be changed using parameter settings.
Transmission specifications
Item Communication format Transmission speed (kbps) Transmission distance (m) Transmission media Number of stations Specifications Conforms to PROFIBUS-DP 9. 6 19. 2 93. 75 187. 5 1200 1000 STP cable 32 stations (can be extended to 126 stations using repeater. )
500 400
1500 200
12000 100
Cable
Item Cable type impedance Capacity Loop resistance Wire gage Conductor area Specifications Shielded twisted-pair wire type A 135 to 165 < 30 pf/m 110 /km 0. 64 mm > 0. 34 mm2
Connector
9-pin D-sub connectors are used.
106
Motion controllers
Nomenclature
Ground wire
Connected to ground on the servo drive
Rotary switch (x1, x10)
For node address setting
RS-232C connector (CN11)
For setup tool
LED (COMM)
Communication status LED for PROFIBUS-DP
LED (ERR)
Module error status LED
Connector for PROFIBUS-DP communication (CN6)
Connector for external signals (CN4)
For connecting external I/O signals or fully-closed encoder signals
Dimensions
JUSP-NS500 - PROFIBUS-DP interface unit
Units: mm
Approx. weight: 0. 2 kg
(24)
FG terminal M4 Connector to SERVOPACK
CN11
NS500
7 8 6 9 X 10 01 2 8 9 01 2 3 5 4
6
7
X 1
CN6 142 Name plate
CN4
20
PROFIBUS-DP unit
3
5
D R C N 11
(100)
4
133
107
Installation
Standard connections
Servo drive type SGDH (For servo drive connection, see Sigma-II chapter) PXD/TXD-P PXD/TXD-N VP DGND 3 8 6 5 CN 6 PROFIBUS-DP I/F Unit Type JUSP-NS500 Fully-closed encoder for speed/position detection
PROFIBUS-DP communication
NS500 Side PG0V PA /PA PB /PB PC /PC
CN 4 1, 2, 3 16 17 18 19 14 15
24 VDC 50mA or more
+ 24VIN CN 4 3. 3 k
PG
E-STOP
External power supply
DC 5 to 12 V P1 + 12 P1 13 P2 + 10 P2 20 Backup battery*1 2. 8 to 4. 5 V + BAT (+) P BAT (-) +24VIN + +24 V Zero point return deceleration LS with /DEC ON Forward run prohibit with P-OT OFF Reverse run prohibit with N-OT OFF External positioning signal /DEC P-OT N-OT WXT 41 25 42 43 44 45 46 26 27 28 29 30 Not Used Not Used 31 32 /COIN + /COIN /BK + /BK /NEAR + /NEAR ALM + ALM Positioning near output (ON when near) Servo alarm output (OFF with an alarm) Photocoupler output Maximum operating voltage 30 VDC Maximum output current 50 mADC Connect shield to connector shell. BK output*2 (ON when brake is released) Positioning completed (ON when positioning is completed) Not Used 21 22 47 40 3. 3 k 39 1 AL 03 SG CN 1 0V 37 38 AL 01 AL 02 Alarm code output Maximum operating voltage 30 VDC Maximum output current 20 mADC P P
P represents twisted-pair wires.
represents shield.
FG
*1 Connect when using an absolute encoder and when the battery is not connected to CN8. [. . . ] I12E-EN-02 In the interest of product improvement, specifications are subject to change without notice.
110
Motion controllers [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OMRON JUSP-NS500
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OMRON JUSP-NS500 will begin.