User manual OMRON H2C

[. . . ] · Easy-to-monitor neon lamp for timing operation indication (for 110, 120, 220, 240 VAC types only). · Easy-to-set large transparent knob and easy-to-read single pattern scale facilitate time setting. · Conforms to EN61812-1 and IEC60664-1 4 kV/1 for Low Voltage, and EMC Directives (except for H2C-F@). Model Number Structure Model Number Legend H2C-@ @ 1 2 2. Operation/Resetting System None: Time-limit operation/self-resetting R: Time-limit operation/electric resetting 1. [. . . ] When using in locations with high ambient temperatures, ensure that there is an interval of at least 5 mm between timers. H2C-F/H2C-FR Mounting Holes Two, M4 or 4. 5 dia. holes For a load current of 1 A max. , dimension L becomes 10 mm min. with an interval of 10 mm between timers. Dimensions with Front Connecting Socket P2CF-08-@/P2CF-11-@ Dimensions with Back Connecting Socket P3G-08/P3GA-11 81. 5 80 H2C H2C-S H2C-R H2C-SR + Adapter 92. 2 85. 7 16. 3 H2C H2C-S H2C-R H2C-SR 16. 3 100. 8* 103. 1* H2C-8 H2C-8R H2C-8 H2C-8R + Adapter Y92F-30 P2CF-11 P2CF-11-E P2CF-08 P2CF-08-E P3GA-11 (When Y92A-48G mounted) Y92F-30 P3G-08 (When Y92A-48G mounted) *These dimensions vary with the kind of DIN track (reference value). 6 Motor Timer H2C Accessories (Order Separately) Adapter for Flush Mounting Y92F-30 Track Mounting/Front Connecting Socket P2CF-08 Eight, M3. 5 x 7. 5 sems 7. 8 3 4. 5 70 max. 20. 3 max. 35. 4 Terminal Arrangement/ Internal Connections (Top View) Surface Mounting Holes Two, 4. 5 dia. or two, M4 P2CF-08-E (Finger Safe Terminal Type) Conforming to VDE0106/P100 Eight, M3. 5 x 7. 5 sems 7. 8 5 3 70 max. 35. 4 4. 5 40±0. 2 Motor Timer H2C 7 Track Mounting/Front Connecting Socket P2CF-11 Eleven, M3. 5 x 7. 5 sems 7. 8 3 4. 5 70 max. 31. 2 max. 35. 4 Terminal Arrangement/ Internal Connections (Top View) Surface Mounting Holes Two, 4. 5 dia. or two, M4 40±0. 2 P2CF-11-E (Finger Safe Terminal Type) Conforming to VDE0106/P100 Eleven, M3. 5 x 7. 5 sems 7. 8 3 1. 2 70 max. 35. 4 5 4. 5 Back Connecting Socket P3G-08 27 dia. Terminal Arrangement/ Internal Connections (Bottom View) 45 45 4. 9 17 P3GA-11 27 dia. Terminal Arrangement/ Internal Connections (Bottom View) 25. 6 45 45 4. 5 16. 3 6. 2 Finger Safe Terminal Cover Conforming to VDE0106/P100 Y92A-48G (Attachment for P3G-08/ P3GA-11 Socket) 34 Twelve, 6. 4 dia. holes 47. 7 x 47. 7 48 x 48 16. 5 24. 6 27. 6 47. 4 8 Motor Timer H2C Mounting Track PFP-100N, PFP-50N PFP-100N2 16 7. 3±0. 15 4. 5 35±0. 3 15 25 10 25 1, 000 (500) (see note) 25 10 25 15 (5) (see note) 27±0. 15 15 1 25 10 25 1, 000 25 10 25 15 4. 5 35±0. 3 27 24 1 29. 2 1. 5 Note: The value shown in parentheses are for the PFP-50N. End Plate PFP-M 10 6. 2 1. 8 Spacer PFP-S 5 16 12 1 50 1. 8 35. 5 35. 3 44. 3 34. 8 11. 5 10 M4 x 8 pan head screw 1. 3 4. 8 16. 5 Time Setting Ring Y92A-Y1 The time setting ring locks the time setting knob to store the set time to facilitate its resetting. A maximum of two time setting rings are connectable per timer. Protective Cover Y92A-48B The protective cover shields the front panel, particularly the time setting section, from dust, dirt, and water, as well as prevents the set value from being altered due to accidental contact with the time setting knob. Timer Hold-down Clips Y92H-2 (for PF085A/PF113A Connecting Socket) Y92H-1 (for PL08/PL11 Connecting Socket) Motor Timer H2C 9 Safety Precautions !CAUTION This may occasionally cause electric shock, fire, or malfunction. Do not allow metal fragments or lead wire scraps to fall inside the H2C. Precautions for Correct Use How to Change the Time Range Change the time range by turning the knob clockwise using a flatblade screwdriver or an Allen wrench. The selected time is displayed in the time range display window above the knob. Precautions for Safe Use Observe the following items to ensure the safe use of this product. Environmental Precautions · Store the H2C within the specified ratings. If the H2C has been stored at temperatures ­10°C or lower, let it stand for 3 hours or longer at room temperature before turning ON the power supply. · Use the H2C within the specified ratings for operating temperature and humidity. Therefore, use the H2C in combination with relays and avoid leaving the H2C for more than 1 month with an output turned ON. How to Mount the Timer on Mounting Track Mounting First hook portion A of the timer to the mounting track, then press the timer in direction B. Dismounting Pull out portion C with a round-blade screwdriver and remove the timer from the mounting track. A C B Electrical Set The motor and clutch do not need to be reset simultaneously. Do not allow power to be continuously applied to the motor and clutch for extended periods of time. X2/b T/a X1/a X1/a T X1 X2 X Auxiliary relay (e. g. , MY Relay) 10 Motor Timer H2C Others Do not turn the operation time setting knob beyond the range of the scale. To achieve higher accuracy in setting, measure the operation time while turning the operation time setting knob. The deviation and setting error for the operation time shows the percent of FS. The absolute value of the deviation and setting error will not change even if the set time is changed. [. . . ] Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be used. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with your OMRON representative at any time to confirm actual specifications of purchased product. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0. 03937. [. . . ]