User manual OMRON CX-DESIGNER V2.1 07-2007

[. . . ] 2. 1 NS-CXDC1-V2 User's Manual Revised July 2007 iv Notice: OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual. The following conventions are used to indicate and classify precautions in this manual. Failure to heed precautions can result in injury to people or damage to property. !DANGER !WARNING Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. [. . . ] Rotates the currently selected object 90 degrees to the right around the center of the screen or frame. Section 3-2 Shortcut keys ------- Rotates the currently selected object 90 degrees to the left around the center of the screen or frame. --- Flips the currently selected object horizontally. --Flips the currently selected object horizontally --around the center of the screen or frame. Flips the currently selected object vertically around the center of the screen or frame. --- Changes the positions of the vertices to change the shape of a fixed object node. Selects all objects of the same type as the currently selected object. --- Ctrl+A Ctrl+D Makes multiple copies of the selected objects. Ctrl+W Displays a list of functional objects on screen Ctrl+L to enable changing property settings. Find Menu Command Find Replace Address Cross Reference Macro Cross Reference Replace Host Function Searches for address or character string keywords. Ctrl+H Finds locations where an address is used and Ctrl+R lists the results. --- 29 Menu Commands View Menu Command Toolbar Window Project Workspace Symbol Table Property List Library Select Object Address in Use List Output Window Status Bar Previous Label Next Label Previous Screen Next Screen Previous Frame Page Next Frame Page Show Address Show Symbol Name Show Address Show I/O Comment Hide Show ID Simulate ON/OFF Show Sheet Object Grid Show Touch Points Zoom Refresh Function Displays and hides the toolbar. Redraws the screen. Section 3-2 Shortcut keys --Alt+1 Alt+2 Alt+3 Alt+4 Alt+5 Alt+6 Alt+7 --Ctrl+PgUp Ctrl+PgDn Shift+PgUp Shift+PgDn PgUp PgDn --------------------F9 30 Menu Commands PT Menu Command Transfer Quick transfer (Computer PT) Transfer (Computer PT) Transfer (PT Computer) Function Section 3-2 Shortcut keys Compares project data with data in the PT and Ctrl+Q transfers only refreshed data to the PT. Ctrl+B Ctrl+Shift+B Ctrl+Alt+B Transfer Setting Sets the communications path to be used in the transfer. Transfer Program System Setting Starts the tool for transferring project data cre- Ctrl+I ated on the CX-Designer to the PT or receive project data from the PT to the CX-Designer. (This is the --same as double-clicking System Setting on the project workspace System Tab Page. ) Sets the project properties. (This is the same as double-clicking Project Properties on the project workspace System Tab Page. ) Registers hosts and sets communications conditions. (This is the same as double-clicking Communication Setting on the project workspace System Tab Page. ) --- Project Properties Communication Setting --- Alarm/Event Setting Registers and corrects alarms and events. --(This is the same as double-clicking Alarm/ Event Setting on the project workspace Common Setting Tab Page. ) Data Log Setting Registers and corrects the data log function. --(This is the same as double-clicking Data Log Setting on the project workspace Common Setting Tab Page. ) Broken-line Graph Group Setting Registers and corrects broken-line graph groups. (This is the same as double-clicking Broken-line Graph Group Setting on the project workspace Common Setting Tab Page. ) --Registers and corrects data blocks. (This is the same as double-clicking Data Block Setting on the project workspace Common Setting Tab Page. ) Document Table Used to register or correct document files dis- --Setting played for document display objects. String Table Setting Used to register or correct character strings in --character tables. (This is the same as doubleclicking String Table Setting on the project workspace Common Setting Tab Page. ) Data Block Setting 31 Menu Commands Command Password Function Sets the password. (This is the same as double-clicking Password Setting on the project workspace Common Setting Tab Page. ) Sets the units and scales used by numeral objects. (This is the same as double-clicking Unit/Scale Setting on the project workspace Common Setting Tab Page. ) Sets the dialog displayed when functional objects are pressed. Sets the screen properties. Section 3-2 Shortcut keys --- Unit/Scale --- Dialog Setting Flicker Color Transparent Screen/Sheet Properties ------------Enter Space Change Input Order Sets the order for shifting the focus for numeral and text input objects on the screen. Edit Contents Object Properties Edit Label Sets switching the contents of individual screens and sheets. [. . . ] (If the settings shown in the figure on the next page are not displayed, click the dialog box title displayed at the upper left of the dialog box. ) 77 Using Machine Navigator Section 4-20 · Set No. (The 3 represents two states in which an alarm occurs and one state in which no alarm occurs. ) · Select Switch contents linking with alarm. Set to $W100. Select Set to 0. If the contents number is not displayed in the tree on the left of the dialog box, click after inputting the set values. Click here. 1 for CNT0001 to set the image file for which the countermeasure is shown. d. [. . . ]