User manual OLYMPUS DS-320
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OLYMPUS DS-320. We hope that this OLYMPUS DS-320 user guide will be useful to you.
You may also download the following manuals related to this product:
OLYMPUS DS-320 DS-320 VIAVOICE KIT INSTRUCTIONS (746 ko)
Manual abstract: user guide OLYMPUS DS-320
Detailed instructions for use are in the User's Guide.
[. . . ] DIGITAL VOICE RECORDER
DS-320
ViaVoice kit
INSTRUCTIONS
Please read these instructions for information about using the product correctly and safely. To ensure successful recordings, we recommend that you test the record function and volume before use.
1
For Safe and Correct Usage
Thank you for purchasing the Olympus Digital Voice Recorder DS-320. Before using your new recorder, read this manual carefully to ensure that you know how to operate it safely and correctly. Keep this manual in an easily accessible location for future reference. [. . . ] · A message can have up to 16 index marks.
ERASE SP DICT
MENU /VOL
INDEX/ FOLDER
REC
STOP
Locating an Index Mark
Press the INDEX/FOLDER button while playing The recorder will search for the next index mark in the message and continue playback from that point. Press the INDEX/FOLDER button while fast-forwarding The recorder will search for the next index mark in the message and then stop immediately. Press the INDEX/FOLDER button while reversing The recorder will search for the previous index mark in the message and then stop immediately. Note
If INDEX is pressed during operation and no index marks are set in the direction that you are advancing (PLAY, FF or REW), the recorder will continue operation.
29
Index Marks
Transferring Messages
A recorded message can be transferred from one folder to the other. The file is added as the last message in the destination folder.
ERASE SP DICT
3, 5
MENU /VOL
1 2 3 4 5
Press the INDEX/FOLDER button to choose the folder containing the message you want to move. Move the MENU/VOL switch up or down to choose the number of the message you want to move. Press the MENU/VOL switch.
Folder Message number
1
INDEX/ FOLDER
REC STOP
2, 4
Transferring Messages
Move the MENU/VOL switch up to choose "MOVE".
The source folder is displayed on the left, and the destination folder on the right.
Press the MENU/VOL switch.
An arrow mark flashes and then "OK" appears on the display when the message is moved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Canceling a move
In Step 5, press the STOP button before pressing the MENU/ VOL switch. The recorder will return to the screen in Step 2.
30
System Sounds (Alarms)
The recorder beeps to alert you to button operations or to warn you of errors. System sounds may be turned off.
ERASE SP DICT
MENU /VOL
INDEX/ FOLDER
1 1, 3 2 23
4
Press the MENU/VOL switch. Press the MENU/VOL switch to choose "ON" or "OFF".
The MENU/VOL switch toggles between "ON" and "OFF" each time you press it. The "OFF" setting disables the system sounds.
REC
STOP
4
Press the STOP button.
System Sounds (Alarms)
This completes the setup procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide of system sounds
Tone Beep, long beep, beep, long beep Long beep every 15 seconds Low-pitched beep Beep Beep, beep, beep, beep Note
The built-in speaker will be shut off when using an earphone.
Explanation · Available recording memory is exhausted. Less than 90 seconds of available recording time is left while recording. Incompatible operation, such as trying to play while "NEW" appears on the display.
31
Formatting
If you want to initialize the built-in flash memory to its factory defaults, follow these steps:
3
ERASE SP DICT
MENU /VOL
1 1 2
2
Press the MENU/VOL switch.
Move the MENU/VOL switch up or down to choose "FORMAT".
"YES?" will flash.
INDEX/ FOLDER
3
Press the ERASE button for 1 second or longer.
REC
STOP
"FORMAT" flashes and then "OK" appears on the display when formatting is complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Abort Formatting
In Step 2, press the STOP button while "YES?" is flashing. The recorder will return to the initial screen before Step 1.
Formatting
Caution
Formatting will clear the flash memory of all recorded messages, and reinitialize the clock and other settings. If you want to initialize the flash memory to its factory defaults, reset the recorder (P. 33) after formatting.
32
Reset
Menu List
Press the MENU/VOL switch
R-TIME
(P. 25)
M-SENS
(P. 26)
VCVA
(P. 27)
R-MODE
(P. 16)
If the display or the recorder acts strangely, lightly press the reset button in the battery compartment with the tip of a ballpoint pen or a similar object. · Voice data is not erased when the recorder is reset.
ALARM
(P. 31)
Reset
FORMAT
(P. 32)
ID
(P. 13)
TIME/DATE
(P. 11)
ERASE
(P. 23)
MOVE
(P. 30)
Menu List
ERASE ALL (P. 22)
: Move the MENU/VOL switch up and down.
Notes
· Stop the recorder before choosing any menu settings. · The recorder will stop if you leave it idle for 3 minutes or longer during menu setup operations.
33
Troubleshooting
Q. 1 Nothing appears on the display A. 1 The batteries are not inserted properly. Q. 5 Audible alarm sounds while recording A. 5 There is little remaining recording time. Q. 6 No sound or quiet sound during playback A. 6 The volume is probably turned down with the MENU/VOL switch. [. . . ] · Following situations are not suitable for voice recognition because the accuracy may be very low: A conference or meeting where the voices of many people have been recorded. Seminar or lecture in which ambient noise tends to be recorded.
57
Converting File Formats
Use the [Save As] command in the [File] menu. To convert a voice file into the WAVE format, select [WAV File] as the file type. When a voice file is converted into the WAVE format, proprietary DSS format data (priority, index marking, etc. ) will be lost. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS DS-320
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS DS-320 will begin.