User manual OLIVETTI SIMPLE WAY

[. . . ] Gruppo Telecom Italia Via Jervis, 77 Ivrea (TO) Italy www. olivetti. com Copyright © Olivetti, 2006 All rights reserved Code: 528002-en Date of publication: July 2006 Trademarks: Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Olivetti disclaims any proprietary interest in trademarks and trade names other than its own. ENERGY STAR is a U. S. registered mark. The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more efficient office equipment. CONTENTS 1 GETTING STARTED . [. . . ] Return the screen settings to their factory default values, or save the settings so they are applied to your next print job. View the estimated amount of ink remaining in the black and colour ink cartridges. Link directly to the Toolbox Maintenance screen where you can view maintenance and troubleshooting information. Link directly to a screen that provides you with the address of the manufacturer's web site, where you can access the information needed to purchase new ink cartridges. Ink Levels · · · SCANNING AN ORIGINAL FROM YOUR APPLICATION 1 2 Open the top cover and place the document or photo you want to scan face down on the scanner glass. Make sure the upper left corner of the front of the item aligns with the upper left corner of the scanner glass. For more information see "Placing Your Document on the Scanner Glass". The scanner driver user interface screen is displayed with a low resolution preview of the document or image on the left-hand side of the screen. You can: Use selection handles to delimit the area of the preview image that you want to scan. Scan a new preview in case you accidentally removed the original from the scanner glass. On the right-hand side of the scanner driver interface screen, customise your scan settings as indicated in the following table: Driver of the scanner Standard You can: · Define whether the document to be scanned consists of black text or line art only, a combination of black text or line art and colour graphics or photos, or just photos, and therefore scan at 150 dpi, 300 dpi or 600 dpi respectively. Select whether to scan in full colour at 24 bits/pixel, in grey at 8 bits/pixel or in black and white at 1 bit/pixel. Return the screen settings to their factory default values, or save the settings so they are applied to your next print job. · · · · · · 24 CHAPTER 3 Driver of the scanner Custom You can: · · · · · · Select the resolution at which you want to scan. Select the colour depth, meaning the number of distinct colours that can be represented in number of bits. Activate a filter that smooths the image, for example when scanning magazine pages. Return the screen settings to their factory default values, or save the settings so they are applied to your next print job. SCANNING AN ORIGINAL FROM THE PRINTER FRONT PANEL 1 2 Open the top cover and place the document or photo you want to scan face down on the scanner glass and aligned with the upper left corner. For more information see "Placing Your Document on the Scanner Glass". A pop-up is displayed with the following Toolbox tools: Scan to file, Scan to application, Scan to e-mail and Scan to fax. Select where you want to send the scanned image by clicking on the corresponding tool icon. The scanner driver user interface screen is displayed with a low resolution preview of the document or image on the left-hand side of the screen. You can: Use selection handles to delimit the area of the preview image that you want to scan. Scan a new preview in case you accidentally removed the original from the scanner glass. On the right-hand side of the scanner driver interface screen, customise your scan settings as indicated in the following table: Driver of the scanner Standard You can: · Define whether the document to scanned consists of black text or line art only, a combination of black text or line art and colour graphics or photos, or just photos, and therefore scan at 150 dpi, 300 dpi or 600 dpi respectively. [. . . ] Printer and scanner drivers (WIN/MAC) Toolbox application (WIN/MAC) User Documentation (WIN/MAC) Additional software (WIN). Temperature ranges · · · · · · · · · · Humidity ranges Software and documentation Minimum system requirements for the connected personal computer Operating system: Microsoft Windows 98 SE, ME, 2000 or XP, or MAC OS X 10. 2 or later. Free hard disk space: 500 MB. 48 CHAPTER 6 PRINTER SPECIFICATIONS Printer Specifications Printing technology Printing system Bubble ink-jet. Two disposable ink cartridges: · 3-colour (Cyan, Magenta, Yellow) · Black · 3 photographic colors. For specific printing requirements, the photographic ink cartridge (sold separately) can be used instead of the black ink cartridge. [. . . ]