User manual OLIVETTI FAX-LAB 350

[. . . ] In addition to this, it is possible to send messages in "FAX" format and by electronic mail ("E-MAIL"). CENTRE XXXX If the number that appears on the lower line of the display coincides with the number provided by your network operator, skip to step 9, otherwise move on to the next step. To do this, press the keys: note For details on the SMS service, please contact the manager of the telephone network to which you are connected. 8. TO ACTIVATE THE SMS SERVICE important To activate the SMS service you must set, both for sending and for receiving message, the numbers indicated by the "SMS Service Centre" and provided by your network operator. [. . . ] 160 characters) as described in "To write and send a message (SMS)". To confirm the setting, press the key: The message "SAVED" appears on display for a few seconds. The message will be saved on the list of written messages "SMS WRITTEN". Afterwards, the fax machine will automatically return to its initial stand-by mode. SEND SMS 2. Press the key: The display shows: note If the message "MEMORY FULL", "DEL. WRITTEN SMS" appears on display and the fax machine does not allow you to write your message, this means that the memory for written and saved messages is full. 160 characters) as described in "To write and send a message (SMS)". To confirm the setting, press the key: The display shows: SEND TYPE:SMS 5. Press the keys until the display shows: TO SET THE LENGTH OF TIME FOR WHICH THE SERVICE CENTRE KEEPS AN UNDELIVERED SMS IN MEMORY 1. To confirm the setting, press the key: The display shows: TYPE NUMBER NUM/TOUCH/SPEED 7. Dial the correspondent's number in one of the following ways: either from numeric keypad or with one-touch dialling keys and speed dialling codes (see the "To set onetouch and speed dialling" section of the "Transmission and reception operations" chapter of the fax machine user's manual). SMS", appear on display, it means that the memory for messages received is full. To confirm the setting, press the key: The display shows from left to right: the reference number which identifies the messages present on the list of messages received (from the oldest message to the most reicon for messages still unread, the cent one), the correspondent's telephone number, the text of the message or part of it, and the date and time. To show all the message-related data and the text of the message on the fax machine, press once the keys: / To stop the text on the display, press again the keys: / If you wish to select the displayed message, skip to step 6, otherwise move on to the next step. To find in the above-mentioned list the message that you wish to select, press the keys: / 6. To select the message, press the key: The display shows: TO ANSWER A MESSAGE (SMS) RECEIVED 1. Press the keys / until the display shows: SMS RECEIVED XX "XX" is the number that appears in the upper right-hand side corner and it indicates the total number of messages received (max. It is useful if you want to know how many messages you have received and, therefore, how many you can still receive. Press a key from 1 to 9 to identify a terminal different from "0" so that it can receive the messages sent to it. To confirm the setting, press the key: The display shows on the upper line: 7. To confirm the setting, press the key: SMS TEXT From this point on, follow the procedure described in "To write and send a message (SMS)", as from the step in which the display shows: "SMS TEXT". To return the fax machine to its initial stand-by mode, press the key: notE If the message "FULL MEMORY", "DELETE SMS" appears on display and the fax machine does not allow you to write the text of your message, this means that: - the memory for messages sent is full or - the memory for messages written and saved is full or - both memories are full. [. . . ] To confirm the setting, press the key: The display shows from left to right: the reference number which identifies the messages present on the list of messages sent (from the oldest message to the most recent one), the correspondent's telephone number, the text of the message or part of it, and the date and time. To show all the message-related data and the text of the message on the fax machine, press once the keys: / To stop the text on the display, press again the keys: / If you wish to delete, edit and/or send again the displayed message, skip to step 6, otherwise move on to the next step. To find in the above-mentioned list the message that you wish to delete, edit and/or send again, press the keys: / 6. To select the message, press the key: The display shows: / SMS WRITTEN XX "XX" is the number that appears in the upper right-hand side corner and it indicates the total number of messages written and saved (max. [. . . ]