User manual OLIVETTI FAX_LAB 146 D

[. . . ] con unico azionista Gruppo Telecom Italia Direzione e coordinamento di Telecom Italia S. p. A. Printed in Thailand. Code of user manual: 259747Z Date of publication: June 2007. Copyright © 2007, Olivetti All rights reserved. No parts of this manual may be photocopied, reproduced or translated into other languages without prior written authorization from Olivetti S. p. A. The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning. This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide connection as a single terminal to an analogue Public Switched Telephone System (PSTN) system. [. . . ] · Type Progressive number of the transactions (transmission/reception) carried out. Reference number of document stored, assigned directly by the fax machine. This number corresponds to the number you dialled, only if the correspondent set his own fax number correctly. Result of the transaction: - OK: if the transaction was completed successfully. - ERROR CODE XX: if the transaction was not completed due to the cause indicated by the error code (see "Error codes", chapter "Troubleshooting guide"). DOCUMENT READY and on the bottom line, the default contrast value: NORMAL. If you want, change the contrast and resolution values as described previously. Press the number key (0-9) under which you previously saved the fax number to which you want to send the document, for example, second: , for more than one · Doc. N · Dialled Number · Name The display shows the digits in the fax number that you assigned to it (see "To program the phone book"). Once the number has been dialled, transmission continues in the ordinary way. · Remote Id TO PRINT REPORTS AND LISTS · Date/Time REPORTS By printing out reports, the fax machine enables you to check the result of all the transactions carried out (transmission and reception), the volume of documents handled and provides a lot of other useful information (the reports may only be managed from the fax machine). The fax machine prints the following reports: · Power failure report: it is always and automatically printed after a power failure, if there are documents in the memory. · Duration · Pages · Result 36 TO ENABLE/DISABLE THE AUTOMATIC PRINTING OF THE 10. To return the fax machine to its initial stand-by mode, press the key: TRANSMISSION AND FAILED TRANSMISSION REPORT 11. Press the keys until the display shows: TO PRINT THE TRANSMISSION, ACTIVITY, BROADCAST TRANSMISSION AND CALLER ID REPORTS ON REQUEST MENU FAX SET-UP 3. Press the keys until the display shows: FAX SET-UP DATE AND TIME 4. Press the key: The display shows: PRINT REPORT LAST TX REPORT You can choose any of the following options: "PRINT REPORT - LAST BROADCAST", "PRINT REPORT ACTIVITY REPORT" and "PRINT REPORT - CALLER ID LIST". To confirm the setting, press the key: Having printed the report, the fax machine automatically returns to its initial stand-by mode. TX REPORT FOR FAILED TX You can choose any of the following options: "TX REPORT - ALWAYS" and "TX REPORT - NO". TX REPORT - FOR FAILED TX - the fax machine will automatically print a report only after each failed transmission. TX REPORT - ALWAYS - the fax machine will automatically print a report after each transmission irrespective of the result. To view the other available options, press the keys: LISTS At any time, you can print a complete list of the installation parameters, set-up parameters and disabled numbers as well as print the data saved in the phone book (the lists may only be managed from the fax machine). By printing out the lists of installation and setup parameters, you will obtain an up to date report of the default values and those that you have set to adapt it to your operating requirements. 9. To confirm the setting, press the key: 37 TO PRINT THE LIST OF INSTALLATION PARAMETERS TO PRINT THE LIST OF RECEPTION SETUP PARAMETERS 1. Press the keys until the display shows: INSTALLATION STATION NAME 4. To confirm the setting, press the key: Having printed the report, the fax machine automatically returns to its initial stand-by mode. INSTALLATION PRINT INSTALL. 5. To confirm the setting, press the key: Having printed the report, the fax machine automatically returns to its initial stand-by mode. TO PRINT THE BLACK LIST NUMBERS TO PRINT THE LIST OF SETUP PARAMETERS 1. [. . . ] from -15oC to +55oC (transport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from 0oC to +45 oC (short and long-term storage) Relative humidity . . . . . . . . . . 15%-85% (operating, short and long term storage) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5%-95% (transport) CHARACTERISTICS OF OPTICAL READER Scanning method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]