User manual OLIVETTI EMBEDDED WEB SERVER ADMINISTRATOR GUIDE

[. . . ] Embedded Web Server Operation Guide PUBLICATION ISSUED BY: Olivetti S. p. A. Gruppo Telecom Italia Via Jervis, 77 - 10015 Ivrea (ITALY) www. olivetti. com Copyright © 2009, Olivetti All rights reserved The mark affixed to the product certifies that the product satisfies the basic quality requirements. The manufacturer reserves the right to carry out modifications to the product described in this manual at any time and without any notice. ENERGY STAR is a U. S. registered mark. The ENERGY STAR program is an energy reduction plan introduced by theUnited States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment. Your attention is drawn to the following actions which could compromise the conformity attested to above, as well as the characteristics of the product: · incorrect electrical power supply; · incorrect installation, incorrect or improper use or use not in compliance with the warnings provided in the User's Manual supplied with the product; · replacement of original components or accessories with others of a type not approved by the manufacturer, or performed by unauthorised personnel. All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher. Legal and General Information Notice Unauthorized reproduction of all or part of this guide is prohibited. [. . . ] For details, refer to the PRESCRIBE Commands Command Reference included on the CD-ROM. These parameters control the initial state of the environment at power-on, including the initial emulation mode, page orientation, character set, buffer allocations in memory, interface parameters, and other options. Some FRPO parameters affect only the current interface (interface-dependent) and some affect all interfaces at once (non-interface-dependent). If the printing system is shared with other users, remember that any changes to any non-interface-dependent parameters may interfere with the print jobs of other users. Printer > Printable Data Printable files can be sent to the printing system for printing. Item File Description Click the Browse button at the right side to select the file. Files with the extensions *. ps, *. prn, *. pdf, and *. txt can be printed. Text up to 255 characters can be entered. Text Advanced Page This section includes advanced settings that apply to the machine and is comprised primarily of advanced network settings. Pages in this section are available only to the Administrator (if the Admin password has been set). Operation Guide 11 EWS Pages Always restart this machine after you have completed these settings in order to properly register the content of those settings in the machine. Refer to Basic > Reset on page 9. Advanced > Protocols > TCP/IP > General The table below provides a summary of the items displayed on the TCP/IP > General page. Item Host Name Description Specifies a name for the printing system network component. Specifies whether or not to acquire the IP address automatically with DHCP. Specifies whether or not to acquire the IP address automatically with BOOTP. Specifies whether or not to acquire the IP address automatically with Bonjour. Specifies whether or not to acquire the IP address automatically with RARP (Reverse Address Resolution Protocol). Specifies whether or not to acquire the IP address automatically with ARP/PING. Specifies the IP address of the primary and secondary DNS (Domain Name System) servers. IP Address Subnet Mask Default Gateway DHCP BOOTP Bonjour Bonjour Name RARP ARP/PING DNS Server (Primary, Secondary) Domain Name Specifies the DNS (Domain Name System) name of the domain which the printing system belongs. Specifies the IP address of the primary and secondary WINS (Windows Internet Name Service) servers. WINS Server (Primary, Secondary) Scope ID Specifies the scope of IP addresses within which the Windows server assigns an IP address to the printing system requesting an address. The DHCP server may be set up to lease IP addresses for a limited time or for an unlimited time, or assign them permanently. 12 Embedded Web Server EWS Pages Item FTP Status Check Description Enables or disables the FTP Status Check. Advanced > Protocols > TCP/IP > IP Filters This page allows you to configure the IP filter. The IP filter is a function that restricts access to this machine by the IP address or protocol types. Item Starting Address Ending Address Protocols Description Specifies the start address of the permitted IP address range. - LPD - FTP - IPP - HTTP - SNMP - RAW Port Advanced > Protocols > TCP/IP > Logical Printers This page allows you to configure the Logical Printers. This machine can be used as a virtual printer for converting ASCII print data to PostScript data or for adding and/or replacing a character strings (commands) at the beginning or end of job data. [. . . ] If there is more than one recipient then the addresses should be separated by a semicolon ";". You can include model name, serial number, MAC address and equipment ID in the subject line as follows: Enter one of the following conversion strings starting with %. The string will be converted into a pre-defined string to display the above information. - %printer = Model - %serial = Serial Number - %etheraddr = MAC Address - %equipid = Equipment ID 20 Embedded Web Server EWS Pages Item E-mail Interval Description Sets the time or interval for sending the status information. [. . . ]