User manual OLIVETTI D-COPIA 500MF

[. . . ] The manufacturer reserves the right to carry out modifications to the product described in this manual at any time and without any notice. The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment. Your attention is drawn to the following actions which could compromise the conformity attested to above, as well as the characteristics of the product: · incorrect electrical power supply; · Incorrect installation, incorrect or improper use or use not in compliance with the warnings provided in the User's Manual supplied with the product; · Replacement of original components or accessories with others of a type not approved by the manufacturer, or performed by unauthorised personnel. Copying or other reproduction of all or part of this guide without the prior written consent of Olivetti S. [. . . ] Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before loading. CAUTION: Before loading originals, be sure that there are no originals left on the original eject table. Originals left on the original eject table may cause the new originals to jam. Put the side to be scanned (or the first side of two-sided originals) face-up. Exceeding the maximum level may cause the originals to jam (see the figure below). Originals with punched holes or perforated lines should be placed in such a way that the holes or perforations will be scanned last (not first). Blinking/Lighting of each Key/Indicator When turning on the main power switch, the Key/Indicator such as the Copy key or the Send key blinks. NOTE: The key which indicator is off can be used even if any other key When turning off the main power switch, press the Power key on the operation panel to off. Make sure that the Power key and the memory indicator are off before turning off the main power switch. CAUTION: Turning off the main power switch before pressing the Power Key to off may cause damage to the standard internal hard disk. In case of not using the machine for extended period of time CAUTION: If the machine will not be used for hours (overnight, etc. If it will not be used for an extended period of time (vacations, etc. CAUTION: Do not turn the main power switch off when the optional fax kit is installed. If you turn the main power switch off, you cannot receive FAX messages. All indicators on the touch panel will go out to save power consumption except the Main Power indicator. If print data is received during Sleep, the print job is performed while the touch panel remains unlit. When using optional fax, received fax data is printed out also with the operation panel remaining unlit. Auto Sleep Auto Sleep automatically switches the machine into Sleep if left idle for a preset time. Adjust the angle of the operation panel in two steps by releasing the operation panel lock lever. The stand-by display (icon) may appear when the touch panel screen is changed. Stand-by Display When System Menu Operation Is Completed When the system menu operation is completed and another function (such as copying) is used, the display below appears. NOTE: If you place the original and press the Start key before the copier has warmed up, only the scanning is performed in advance and the copying job starts upon completion of the warm-up. [. . . ] The treatment, collection, recycling and disposal of electric and electronic devices will be carried out in accordance with the laws in force in the country in question. Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software. You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. [. . . ]