User manual OLIVETTI D-COPIA 35

[. . . ] No responsibility is assumed if accidents occur while the user is following the instructions in this manual. No responsibility is assumed for defects in the printer's firmware (contents of its read-only memory). This guide and any copyrightable subject matters sold or provided with or in connection with the sale of the machine are protected by copyright. Copying or other reproduction of all or part of this guide and any copyrightable subject matters without the prior written consent of Olivetti S. p. A. [. . . ] The following modes are available for selecting the desired zoom ratio. 25% 400% Mode Standard Zoom Description Copies can be made at one of the fixed zoom ratios. The following ratios are registered in the machine: Original 100% Fit To Paper Letter - Statement 64% A4 - A5 70% Statement - Letter 129% A5 - A4 141% The zoom ratio can be set to any 1% increment between 25% and 400%, as desired and shown below. Custom Variable Zoom NOTE: Fit To Paper is used when original that there are characters and illustrations in a full form is copied. The blank part of the print is calculated, and original is reduced and copied. It is not a function to enlarge or reduce by the automatic operation according to the paper size. Standard Zoom 1 2 3 4-4 Press [Zoom]. The new zoom ratio is registered. OPERATION GUIDE Copy Functions To start copying, place the original on the platen and press [Start]. Variable Zoom Perform the following procedure to make settings for the Variable Zoom mode. 1 2 3 Press [Zoom]. Press or to select Custom and press [OK]. Enter the desired ratio using numeric keys. / 4 Press [OK]. To start copying, place the original on the platen and press [Start]. Collate Mode Multiple originals can be collated. Originals Copies 1 Press [Collate] to select . or 2 3 Enter the desired number of copies. Scanning will start. OPERATION GUIDE 4-5 Copy Functions 4 Once all of the originals have been scanned, press . Scanned pages are printed. / Combine Mode The images from either 2 or 4 originals can be reduced and combined onto a single copy. Copies one original onto one sheet. NOTE: Combine Mode does not support the Collate Mode or Zoom Mode. When an original set in the Document Processor, the Combine mode automatically starts scanning all the page. 1 Press [Combine] to select the desired mode. 2 3 4 EcoPrint Mode Enter the desired number of copies. Contrast Adjusts the range between the darkest and the lightest shades in the image. Invert The invert command reverses the brightness and the color in the image. For color images, each pixel will be changed into its complementary color at the command of Invert. Preview Auto-Area Clicking the Preview Auto-Area button automatically crops the preview scan area to the previewed document. Original Size Select a size on the Original Size list of frequently used scan sizes, including business card, 5 x 3 in. , 6 x 4 in. , Letter, B5, A5, A4 or your current scan area to perform an immediate selection of your scan size. Units The Units button indicates the measuring system that is in use (Inch, Cm, or Pixel). Descreen Click the Descreen button to access a drop-down menu that allows you to specify the type of document you are scanning in order to eliminate the moiré pattern commonly found in printed matter. Moiré pattern is an undesirable pattern resulting from the incorrect screen angle of the overprinting halftone. Sharpen Click the Sharpen button to access a drop-down menu that allows you to specify a level to sharpen the scanned image. You can specify a Sharpen setting of Light, More, Heavy, or Extra Heavy. OPERATION GUIDE 5-3 Scanning Functions Color Adjustment Click the Color Adjustment button to enable the button for the Hue, Saturation, and Lightness feature. NOTE: The Advanced Settings button must be enabled in order to use the Hue Saturation, and Lightness feature. Auto Level Click the Auto Level button to add shadow to reveal more details in an image. Advanced Settings Click the Advanced Settings button to view the advanced settings buttons for Highlight/Shadow Levels, Curves, Color Balance, Hue/Saturation/Lightness, Color Drop-out, and Custom Settings (six buttons on the right side of the TWAIN dialog box). [. . . ] Remove all the document pages inside the document processor, and set them again correctly. The data transferred to the machine was too complex to print on a page. If this message still remains, turn the power switch off, and contact your service representative or authorized service center. If this message still remains, turn the power switch off, and contact your service representative or authorized service center. [. . . ]