User manual OLIVETTI D-COLOR P26 SUPPLEMENTO

[. . . ] Olivetti d-Color P20W/P26W/P26 NETWORK USER'S GUIDE PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacuter assumes no responsibility for the results of errors beyond its control, and also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer. While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. [. . . ] Select [Next] and then provide the following information: (a) In [Name or address of server providing LPD] enter the host name or Internet Protocol (IP) address of the host for the printer you are adding. In [Name of printer or print queue on that server] type "lp". (b) Microsoft Windows> 56 (c) Follow the instructions on the screen to finish installing the TCP/IP printer. Port 9100 1. Select [Local Printer], clear the [Automatically detect my printer] check box and then click [Next]. The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear. If the above IP address is entered, the Port Name will default to IP_192. 168. 1. 31. Select [Follow the instructions on the screen to finish installing the printer. ] 9. Select [Next]. Microsoft Windows> 57 6. Type printer URL in text box labelled [Connect to a printer in the Internet or your Intranet], e. g. 8. WINDOWS XP NOTE: Windows XP requires administrator privileges. With Windows XP, there are four options for printing using TCP/ IP: > > > > Manufacturers' LPR Microsoft LPR Port 9100 IPP Manufacturers' LPR Please follow the procedure described on page 50. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then select [Next]. The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear. Enter [Printer name or IP address], for example: 192. 168. 1. 31. Microsoft Windows> 58 5. 6. If the above IP address is entered, the Port Name will default to IP_192. 168. 1. 31. Ensure [Queue Name] is "lp" and [SNMP Status Enabled] is deselected. Follow the instructions on the screen to finish installing the printer. Port 9100 1. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then select [Next]. The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear. If the above IP address is entered, the Port Name will default to IP_192. 168. 1. 31. 12. Ensure [Port Number] is 9100 and [SNMP Status Enabled] is deselected. Follow the instructions on the screen to finish installing the printer. IPP 1. Select [A network printer, or a printer attached to another computer]. Select [Connect to a printer on the Internet or on a home or office network] and type printer URL in text box, e. g. The printer supports Novell 3, 4, 5 and 6, and allows print jobs to be directed to the appropriate Novell print queue. [. . . ] Check the printer name displayed in the print server monitor of the file server and the NetWare port name set in the NIC are the same. If there are multiple network interface cards, configure the NetWare port names to be different. PRINT SERVER MODE Check the file server name set in the NIC and on the file server are the same. Check the printer name set in the file server and the NetWare port name set in the NIC are the same. If there are multiple NICs, configure the NetWare port names to be different. [. . . ]