User manual OLIVETTI D-COLOR MF201PLUS-MF250-MF350

[. . . ] d-Color MF250 d-Color MF350 d-Color 201Plus d-Color MF250 / MF350 / 201plus USER MANUAL Code 543103en PUBLICATION ISSUED BY: Olivetti S. p. A. Gruppo Telecom Italia Via Jervis, 77 - 10015 Ivrea (ITALY) www. olivetti. com Copyright © 2007, Olivetti All rights reserved The mark affixed to the product certifies that the product satisfies the basic quality requirements. The manufacturer reserves the right to carry out modifications to the product described in this manual at any time and without any notice. ENERGY STAR is a U. S. registered mark. The ENERGY STAR program is an energy reduction plan introduced by theUnited States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment. Your attention is drawn to the following actions which could compromise the conformity attested to above, as well as the characteristics of the product: · incorrect electrical power supply; · incorrect installation, incorrect or improper use or use not in compliance with the warnings provided in the User's Manual supplied with the product; · replacement of original components or accessories with others of a type not approved by the manufacturer, or performed by unauthorised personnel. All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher. Contents 1 Introduction 1. 1 1. 2 1. 3 Energy Star®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When page 2 is specified Finishing Single-sided copies Double-sided copies Description The specified paper is inserted for the 2nd sheet of the copy, and the 2nd sheet of the original is copied onto it. The back side of the 1st sheet of the copy is left blank, the specified paper is inserted for the 2nd sheet of the copy, and a double-sided copy of the 2nd and 3rd sheets of the original are printed onto it. Copy If "Blank" is selected, the specified paper is inserted after the specified page. When page 3 is specified Finishing Single-sided copies Double-sided copies Description The specified paper is inserted as the 4th sheet of the copy. The back side of the 2nd sheet of the copy is left blank, and the specified paper is inserted for the 3rd sheet of the copy. Blank ! Detail The specified paper can be inserted at a maximum of 30 locations within an original of up to 999 pages. In double-sided originals, one double-sided page is considered to be two pages (one for the front and one for the back). 3-106 d-Color MF350/250/201Plus Copy Operations 3 Position the original to be copied. ­ ­ For details on positioning the original, refer to "Feeding the original" on page 3-27. For an original that exceeds 100 pages, refer to "Scanning the original in separate batches ("Separate Scan" setting)" on page 3-30. 1 2 Load the paper to be used for the insertions sheets and the main body of the original into the desired paper trays. ­ ­ Use paper with the same size for the insertion sheets and for the main body of the original, and load them in the same orientation. To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to the settings are canceled. 3 Touch [Application], and then touch [Sheet/Cover/Chapter Insert]. ­ ­ For details on using thick paper for the insertion sheets and on loading the paper, refer to "Paper types and paper capacities" on page 3-80 and "Loading paper into the bypass tray" on page 3-23. To cancel the setting and select the default, press the [Reset] key. The Sheet/Cover/Chapter Insert screen appears. 4 Touch [Insert Sheet]. ­ To cancel the "Insert Sheet" function, touch [No]. The Insert Sheet screen appears. d-Color MF350/250/201Plus 3-107 3 5 Copy Operations Touch a button for a page number, and then use the keypad to type in the number of the page where the paper is to be inserted. To arrange the page numbers in order, starting with the lowest number, touch [Sort]. To remove a page number that has been specified, touch the button for the page to be removed, and then press the [C] (clear) key. If the same page number is entered multiple times, copying is not possible. If the entered page number is greater than the number of pages in the original, paper is not inserted. 6 7 Touch [Insert Paper]. Select the paper tray loaded with the paper for the insertion sheets, and then touch [OK]. 8 Under "Insert Type", touch either [Copy] or [Blank]. ­ If "Copy" is selected, the original is copied with the specified paper inserted for the specified page. If "Blank" is selected, the specified paper is inserted after the specified page. 9 10 11 12 Touch [OK], and then touch [OK] in the next screen that appears. Press the [Start] key. 3-108 d-Color MF350/250/201Plus Copy Operations 3 3. 25 Inserting copies of a different original for a specified page ("Insert Image" function) A multi-page original later scanned from the original glass can be inserted at the specified location in an original first scanned with the ADF. The inserted original is added after the specified pages. ! Detail A separate original can be inserted at a maximum of 30 locations within an original of up to 999 pages. [. . . ] DIC and other trademarks contained in the Profile are trademarks or registered trademarks of DIC in Japan and/or other countries. You may not remove or alter any trademark, trade names, product names, logo, copyright or other proprietary notices, legends, symbols or labels in the Profile. This License Agreement does not authorize you to use DIC's or its licensors' names or any of their respective trademarks. THE PROFILE IS PROVIDED TO YOU FREE OF CHARGE, AND ON AN "AS-IS" BASIS, IN ACCORDANCE WITH THE TERMS AND COONDITIONS OF THIS LICENSE AGREEMENT. [. . . ]