User manual OLIVETTI D-COLOR MF2000 SET-UP GUIDE

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Software licence agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Explanation of manual conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety advices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ­ ­ For details on positioning the original, refer to "Feeding the original" on page 3-27. For an original that exceeds 100 pages, refer to "Scanning the original in separate batches ("Separate Scan" setting)" on page 3-30. 2 Load the paper for the cover pages and the paper for the main body of the original into separate paper trays. ­ Use paper with the same size for the cover pages and for the main body of the original, and load them in the same orientation. d-Color MF350/250/201Plus 3-103 3 3 Touch [Application], and then touch [Sheet/Cover/Chapter Insert]. ­ ­ Copy Operations For details on using thick paper for the cover sheets and on loading the paper, refer to "Paper types and paper capacities" on page 3-80 and "Loading paper into the bypass tray" on page 3-23. To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to the settings are canceled. The Sheet/Cover/Chapter Insert screen appears. 4 Touch [Cover Sheet]. The Cover Sheet screen appears. 3-104 d-Color MF350/250/201Plus Copy Operations 3 Select the desired cover page settings. ­ ­ ­ To cancel the setting and select the default, press the [Reset] key. The default setting for the paper tray loaded with cover pages can be specified from the Utility mode. 5 6 7 If desired, touch [Paper] under "Front Cover" or "Back Cover". Select the paper tray loaded with the paper for the cover pages. 8 9 10 11 Touch [OK], and then touch [OK] in the next two screen that appears. Press the [Start] key. d-Color MF350/250/201Plus 3-105 3 3. 24 Different paper (such as colored paper) can be inserted for specified pages in the copies. Copy Operations Inserting different paper into copies ("Insert Sheet" function) There are settings ("Copy" and "Blank") for selecting whether or not the inserted pages are printed. When the settings are combined with single-sided copying or double-sided copying, the copies are printed as shown below. The inserted original is added after the specified pages. ! Detail A separate original can be inserted at a maximum of 30 locations within an original of up to 999 pages. In double-sided originals, one double-sided page is considered to be two pages (one for the front and one for the back). 1 Load the original into the ADF. ­ ­ For details on positioning the original, refer to "Feeding the original" on page 3-27. For an original that exceeds 100 pages, refer to "Scanning the original in separate batches ("Separate Scan" setting)" on page 3-30. 2 Touch [Application], and then touch [Sheet/Cover/Chapter Insert]. ­ To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to the settings are canceled. The Sheet/Cover/Chapter Insert screen appears. d-Color MF350/250/201Plus 3-109 3 3 Touch [Insert Image]. ­ ­ To cancel the setting and select the default, press the [Reset] key. To cancel the "Insert Image" function, touch [No]. Copy Operations The Insert Image screen appears. 4 Using the keypad, specify the pages where the image is to be inserted. ­ ­ ­ ­ ­ ­ ­ ­ There are two Insert Image screens. To arrange the page numbers in order, starting with the lowest number, touch [Sort]. To remove a page number that has been specified, touch the button for the page to be removed, and then press the [C] (clear) key. If the original scanned from the original glass has more pages than the number of pages specified in the Insert Image screen, the extra pages of the insertion original are printed at the end of the original. [. . . ] You may install and use the Profile on a single desktop computer; provided, however, that, notwithstanding anything contrary contained herein, you may not use the Profile on any network system or share, install or use the Profile concurrently on different computers, or electronically transfer the Profile from one computer to another or over a network. You may not make or distribute copies, fix, alter, merge, modify, adapt, sublicense, transfer, sell, rent, lease, gift or distribute all or a portion of the Profile, or modify the Profile or create derivative works based upon the Profile. You acknowledge that the Profile is not intended for any usage which may cause death or physical injury or environmental damage and agree not to use the Profile for such usage. You shall not use the Profile to develop any software or other technology having the same primary function as the Profile, including but not limited to using the Profile in any development or test procedure that seeks to develop like software or other technology, or to determine if such software or other technology performs in a similar manner as the Profile. [. . . ]