User manual OLIVETTI CMS 140 EURO ADDENDUM

[. . . ] This Operation Guide is meant to be read when the Scanner Interface Card is installed and your copier is to be used as a network scanner. it explains set-up procedures and other related operation on the machine. As the required set-up in order to use the copier as a scanner may differ depending upon the environment in use in the connected computer, please read those sections related to your specific computer environment and perform the appropriate set-up procedures explained there. This Operation Guide should also be read and used together with the appropriate Operation Guide <Functions Edition> (On-Line Manual) that is on the included CD-ROMs. [. . . ] Reset key -- Press this key when you want to cancel initial setting change or date/time setting. Scanner key -- Press this key when you want to switch the machine to the scanner mode. When the scanner mode is selected, the scanner indicator will light up. And cursor keys -- Press these keys to select an item in various settings. < and > cursor keys -- Press these keys to change the date/time setting. Press this key when scanning is completed · 10 Scan Function Key -- The following settings can be adjusted. Prior to using the scanner for the first time, verify that the following accessories are included with this product. Refer to the On-Line Manual <Functions Edition> of this Operation Guide for information on using the included utilities and other software. You must have on hand one of the following cables as appropriate to your computer network environment. Be absolutely sure that the 10BASE-T or 100BASE-TX cable that you use is a shielded cable. Example of transmission modes for data scanned using the Scan System and the required software The software indicated in the thick-lined balloons is included with this product. scan to PC Stores the image data of scanned originals as a file in a desired folder on your computer. Install the Scanner File Utility into the corresponding computer in order to use this function. Registration of the save folder in your computer, as well as registration in the scanner of the destination is required. For information on making settings from an Internet Web browser, as well as for each utility, refer to the On-Line Manual <Functions Edition> of this Operation Guide. For information on making settings from an Internet Web browser, as well as for each utility, refer to the On-Line Manual <Functions Edition> of this Operation Guide. TWAIN Connects to the scanner from the TWAIN-compatible application according to the procedures of that particular application. Install the TWAIN Source on the computer that contains the application in order to use this function. The following utilities are contained on the CD-ROM that is included with this product. Refer to the On-Line Manual <Functions Edition> of this Operation Guide for information on using the included utilities. Insert the CD-ROM that is included with the scanner into the CD-ROM drive of your computer. If this screen does not appear after you insert the CD-ROM, open the CD-ROM window to access its contents and double-click on the [setup. [. . . ] the scanned original image will be automatically reduced or enlarged to the specified size. G H I J K Enter (OK) key -- Press this key to confirm the setting in various setting screens. Stop/Clear key -- Press this key to stop scanning, clear an entered value or return to the previous screen. Reset key -- If you select this key to cancel scan setting, the scan setting screen will appear. [. . . ]