User manual OKI PRO511DW SETUP GUIDE

[. . . ] Do not put the product on or near a heat source (such as a radiator or heat register). Allow enough room around the product for adequate ventilation and easy access to the paper trays. If you put the product in any kind of enclosure, make sure the enclosure is well ventilated. €¢ Be certain that your power source matches the rating listed on the back of the product. [. . . ] Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. iN NO EVENT SHALL OKI DATA OR ITS AFFILIATES BE LIABLE TO A PURCHASER OR ANY OTHER PERSON FOR SPECIAL , COLLATERAL , PUNITIVE , INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS , BUSINESS REVENUE , GOODWILL OR ANTICIPATED SAVINGS IN CONNECTION WITH OR ARISING OUT OF THE PURCHASE OR USE OF THE OKI DATA PRODUCT , WHETHER ARISING IN CONTRACT OR IN TORT , WHETHER OR NOT CUSTOMER SHALL HAVE INFORMED OKI DATA OF THE POSSIBILITY OR LIKELIHOOD OF ANY SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. On-Site Repair does not include the replacement or repair of Product consumables or supplies. Oki Data will, for a period of two (2) years from the date of original purchase, repair or replace (at Oki Data's option) on-site at the original purchaser's facility and without charge, any defective component(s) of the Product provided that the warranty service is performed by an Oki Data authorized service provider. The printheads (LED imaging arrays) have a 5-year parts only warranty from date of original purchase. Following the first year of warranty coverage, the printheads will be replaced by an authorized Oki Data service provider at Oki Data's then current labor rates. To make request or claim for service under the two (2) years parts and labor coverage of this Limited Warranty, contact your Oki Data Authorized Dealer, authorized third-party service provider, or Oki Data. Oki Data reserves the right to use new and/or refurbished parts for the warranty repair. As a condition of this Limited Warranty, requests for On-Site Repair must include the name and phone number of a fully competent and responsible adult with the authority to consent to the entry of the servicing technician to the premises where the Product is located, and who will remain with the servicing technician while the service work is performed. Any and all dangerous conditions must be removed from the site prior to and throughout the time a service technician is present. 220/240-Volt Models This product complies with the Class A limits for radio interference as specified in the IC Radio Interference Regulations. European Union Council of the European Communities Statements of Conformance for 220/240-Volt Models Electromagnetic Conformance This product complies with the requirements of the Council Directive 89/336/EEC on the approximation of the laws of the member states relating to electromagnetic compatibility. Safety Conformance This product is in conformity with Directive 73/23/EEC on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits. 6 - English Material Safety Data Sheet (MSDS) #58384902 for Black Toner , P/N 52124004 For more information , contact Oki Data at: 2000 Bishops Gate Boulevard , Mount Laurel , NJ 08054-4620. Emergency First Aid Procedures _____ Toner swallowed (ingested) Never give anything by mouth to an unconscious person. If possible, rinse out mouth and give several glasses of water to drink. Flush eyes with large quantities of cool water for 15 minutes, keeping the eyelids open with fingers. Note: Small amounts of toner on skin or clothing can easily be removed with soap and cold water. Effects of Chronic Exposure: In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16 mg/m3) exposure group. A minimal to mild degree of lung fibrosis was observed in 22% of the rats in the middle (4 mg/m3) exposure group. No pulmonary change was reported in the lowest (1 mg/m3) exposure group, the most relevant level to potential human exposures. [. . . ] preventive Measures______________ Personal Protective Equipment Respiratory Protection: Not normally required. For large spills, use leather gloves and safety goggles during cleanup. Carefully clean up the spill with a wet cloth, avoiding inhalation of fine dust. Remove sources of ignition and keep unnecessary and unprotected personnel away from area. [. . . ]