User manual OKI OKIPOS 425S ACCESSORY INSTRUCTION GUIDE

[. . . ] 802. 11b Print Server User's Guide Part Number 40148-100 Revision 1. 0 Copyright Notice All rights reserved. No part of this publication may be reproduced, stored, in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of TROY Group, Inc. The information contained herein is designed only for use with this TROY product. TROY is not responsible for any use of this information as applied to other products. [. . . ] DEFINE/FORM DEFAULT/NOTRUNCATE/NOWRAP 8-2 9 Banyan VINES Network Configuration Note: Only TROY EtherWind-N models include Banyan VINES support. EtherWind wireless print servers support the Banyan VINES IP protocol to allow printers to be shared on a Banyan VINES network. Users on client PC's send their jobs to any VINES file server running the Banyan PCPrint software, which in turn spools jobs to the print server. Printing is transparent to user applications, and the print server can be managed using standard VINES utilities such as MANAGE, MUSER, MSERVICE and Operator Console. File Server User Configuration 1. From any VINES workstation log in as supervisor and run the MANAGE program. Type in a StreetTalk name for the print server, (entering a password is optional). Enter NO in response to the message "Do you want to force the user to change passwords on the next login?". Press ESCAPE twice to return to the main menu. File Server Queue Configuration 1. From the Manage Services menu, select Add a server-based service and press ENTER. From the Add a Service screen type the desired StreetTalk name for the print queue and press ENTER, followed by a description and press ENTER. 9-1 4. Press F10 in response to the message "The service is running but not yet available to users. " 7. Type in the maximum number of jobs and maximum size of job for the queue at the Configure Queue screen. If desired choose a default paper format at the Configure Paper Formats screen, otherwise press F10 to select the default settings. If desired enter the authorized user names at the Access Lists screen, or press F10 for the defaults. 11. At the Destination Attributes screen, enter the StreetTalk name of the print server. 12. At the Output Strings screen, press F10 to accept the output string values. 14. Select NO in response to the message "Would you like to add another destination at this time?" 15. At the Print Queue Status screen, change both values to Yes to enable the print queue to accept and print jobs. 16. Press ESCAPE multiple times to exit the Manage utility. Print Server Configuration 1. Install the XAdmin software from the CD-ROM provided with the print server. Note: Use XAdmin, not XAdmin32, when configuring a VINES-only network. You can use XAdmin32 on a VINES network only if the PC is running TCP/IP and both the PC and print server have valid IP addresses. 2. The print server will show up as "XCD_xxxxxx_P1" where "xxxxxxx" is the last six digits of the Ethernet address. Enter the StreetTalk name of the print server, this must exactly match the StreetTalk name of the user that was created using the Manage Users utility. 10. Enter the StreetTalk name of the queue created using the Manage Services utility. [. . . ] It is the responsi13-1 bility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. For European Users This product is in conformity with the protection requirements of EU Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. TROY Group cannot be responsible for any failure to satisfy the protection requirements resulting from a nonrecommended modification of the product. [. . . ]