User manual OKI OKIPAGE 24 NETWORK CARD

[. . . ] OkiLAN 6010e® Pocket Print Server User's Guide High Performance Ethernet Network Print Server Copyright and Trademark Information Printing History Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Okidata assumes no responsibility for the results of errors beyond its control. Okidata also cannot guarantee that changes in products made by other manufacturers and referred to in this handbook will not affect the applicability of the information in it. This handbook is subject to change without notification. ©1998 by Okidata. [. . . ] LF Use the LF suffix at the end of the Remote Print Queue Name, before the port number. Example: queueLF2 TCP/IP OKI OkiLAN 6010e User's Guide IV - 19 Section IV - TCP/IP In addition to the form feed described above, the OkiLAN 6010e inserts a carriage-return character into the print job immediately before each line-feed character. NF Use the NF suffix at the end of the Remote Print Queue Name, before the port number. Example: queueNF2 The OkiLAN 6010e inserts a carriage-return character into the print job immediately before each line-feed character. This option differs from LF in that form feed is not added to the end of jobs. Configuring a BSD-Style Print Queue For remote BSD-Style LPD printing, add the OkiLAN 6010e as a remote printer in the "/etc/printcap" database to each host printing to the OkiLAN 6010e. If you are unfamiliar with PRINTCAP, consult your local documentation. IV - 20 OKI OkiLAN 6010e User's Guide Section IV - TCP/IP The entry should be similar to the following: local_print_queue_name|[printer_model_and_manufacturer]:\ :lp=:mx#0:rm=OkiLAN 6010e_name:\ :rp=remote_print_queue_name:\ :sd=path_to_spool_directory:lf=just log_file_name local_print_queue_name The local_print_queue_name defines the name of the printcap entry. It is used by the lpr/lpd utilities to specify which printcap entry is being referenced. Additional printcap entries can be added as needed for different queue types. Each entry must have a unique local_print_queue_name and a different spool directory to work properly. When you are ready to print, use the local_print_queue_name that matches the data type of the file to be printed. This must be the same name as entered in the /etc/hosts file or your NIS or DNS system. remote_print_queue_name The remote_print_queue_name entry determines the OkiLAN 6010e port where the print job will be printed and optionally specifies ASCII printing. path_to_spool_directory This is the path to a directory where the print jobs will be spooled for this queue. You must create a unique spool directory for each printcap entry. OKI OkiLAN 6010e User's Guide IV - 21 TCP/IP Section IV - TCP/IP log_file_name This is the path to a file where error information from the lpd will be logged. Example: If you are printing to an ASCII printer that requires a carriage return/line feed, you may need two separate printcap entries: one entry for print jobs which terminate lines with a carriage return/line feed, and another entry for print jobs which terminate lines with a line feed only. Your printcap entries might look like the following: ascii_files|form. feed. Queue_on_Port_2:\ :lp=:mx#0:rm=pserver1:rp=MYQUEUEFF2:\ :sd=/usr/spool/myqueueff2:\ :lf=/usr/spool/myqueueff2/queue. log asciilf_files|line. feed. Queue_on_Port_2:\ :lp=:mx#0:rm=pserver1:rp=MYQUEUELF2:\ :sd=/usr/spool/myqueuelf2:\ :lf=/usr/spool/myqueuelf2/queue. log Note: Each printcap entry must have a different spool directory to work properly. IV - 22 OKI OkiLAN 6010e User's Guide Section IV - TCP/IP Remote LPD Printing The way print jobs are queued to a Remote LPD system varies among the vendors that support TCP/IP. UNIX systems that are BSD-based typically use the lpr program to submit print jobs. PC-based TCP/ IP packages often provide a command line lpr program and a utility to redirect the output of an LPT port to a Remote LPD system. Consult your system administrator or software vendor for assistance troubleshooting LPD. Note: The Remote LPD implementation of the OkiLAN 6010e does not support any UNIX LPD input or output filters or the direct printing of banner pages. It is possible to configure some UNIX systems so that banner pages and input and output filters will be generated at the UNIX host and then sent to the OkiLAN 6010e. (Refer to Appendix B, Application Considerations. ) FTP Printing FTP is a command line program used to transfer files between computers. [. . . ] Click OK. OKI OkiLAN 6010e User's Guide V - 21 Windows Printing Section V - Windows Printing Section V - Windows Printing You will enter into the Add OkiLAN 6010e Connect Port screen where there will be a list of all OkiLAN 6010e print servers available on the local subnet. V - 22 OKI OkiLAN 6010e User's Guide 6. If the port you wish to add is listed in the Ports available on local subnet window, select the port name and click the Add button. If the port you wish to use is not listed, click the Locate non-local device button and enter the Static IP Address used for the print server. Note: The OkiLAN 6010e Connect discovery feature will relocate a print server by the port name, even if the IP address changes. [. . . ]