User manual OKI PAGE 8C PLUS GENERIC NETWORK GUIDE

[. . . ] Network Guide PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control. Oki also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki. [. . . ] In [Name of printer or print queue on that server] type the logical printer name "lp" and then click [OK]. Follow the instructions on the screen to finish installing the LPR-compatible printer. 7. 8. If the LPR port is not available, install the Microsoft TCP/IP Printing Service. Select [Start], [Settings], [Control Panel] and then double-click the [Network] icon. If the [Microsoft TCP/IP Printing] is not listed, click the [Add] button. Microsoft Windows> 18 4. 5. In the [Select Network Service] dialogue box, select [Microsoft TCP/IP Printing] and click [OK]. Follow the remaining dialogue box prompts. WINDOWS 2000 NOTE: Windows 2000 requires administrator privileges. With Windows 2000, there are four options for printing using TCP/IP. > > > > OkiLPR Microsoft LPR Port 9100 IPP OkiLPR Please follow the procedure described on page 56. Microsoft LPR NOTE: In order to use Microsoft LPR, it must first be installed on your system. To install this port, proceed as follows: 1. Select [Local Printer], clear the [Automatically detect my printer] check box, and then select [Next]. Select [Next] and then provide the following information: (a) In [Name or address of server providing LPD] enter the host name or Internet Protocol (IP) address of the host for the printer you are adding. In [Name of printer or print queue on that server] type "lp". Microsoft Windows> 19 (b) (c) Follow the instructions on the screen to finish installing the TCP/IP printer. Port 9100 1. Select [Local Printer], clear the [Automatically detect my printer] check box and then click [Next]. The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear. If the above IP address is entered, the Port Name will default to IP_192. 168. 1. 31. Select [Follow the instructions on the screen to finish installing the printer. ] 9. Select [Next]. Microsoft Windows> 20 6. Type printer URL in text box labelled [Connect to a printer in the Internet or your Intranet], e. g. 8. WINDOWS XP NOTE: Windows XP requires administrator privileges. With Windows XP, there are four options for printing using TCP/ IP: > > > > OkiLPR Microsoft LPR Port 9100 IPP OkiLPR Please follow the procedure described on page 56. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then select [Next]. The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear. Enter [Printer name or IP address], for example: 192. 168. 1. 31. Microsoft Windows> 21 5. 6. If the above IP address is entered, the Port Name will default to IP_192. 168. 1. 31. [. . . ] Check the printer name displayed in the print server monitor of the file server and the NetWare port name set in the NIC are the same. If there are multiple network interface cards, configure the NetWare port names to be different. PRINT SERVER MODE Check the file server name set in the NIC and on the file server are the same. Check the printer name set in the file server and the NetWare port name set in the NIC are the same. If there are multiple NICs, configure the NetWare port names to be different. [. . . ]