User manual OKI ML 6300 ACCESSORY INSTRUCTION GUIDE

[. . . ] As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the product. · Carefully read the provided setup and operating instructions. · Read and follow all warning and instruction labels on the product itself. · SIDM only The printhead can get quite hot when it has been printing for a length of time. If you place it on a soft surface, such as a rug, sofa, or cushion, the vents may be blocked, causing the product to overheat. [. . . ] If the product casing gets extremely hot or smoke, unusual smells or abnormal noises are emitted from the product, there is a risk of fire. If the product has been knocked over or damaged, there is a risk of electric shock, fire and/or injury. If any liquid (for example water) is allowed to enter the product, there is a risk of fire. Do not place containers containing liquid on the product as electric shock, fire and/or injuries may occur. If any foreign objects (for example clips) are allowed to enter the product, there is a risk of electric shock, fire and/or injury. Do not introduce foreign objects into the ventilation holes or operate this product with any covers open or doors removed as electric shock, fire and/or injuries may occur. Do not use an extremely flammable spray near the product as the product contains high temperature parts that may cause a fire. Ensure loose clothing and hair is kept clear of moving parts when the product is in operation to prevent possible risk of injury. Do not carry out any operations on the product that are not specified in the User's Guide. There is a risk of explosion if the battery is replaced by an incorrect type. The product battery should not require replacement during the life of the product. Do not throw toner cartridges or image drum cartridges into a fire as you may receive burns from a dust explosion. After installing additional memory, hard disk drive, or any other internally fitted option, any covers removed or doors opened must be closed or replaced and secured to prevent risk of fire. The acoustic noise of this product is less than 70 dB (A) as measured in accordance with EN ISO 7779. The operating condition range for your product is: 10 to 32°C and 20 to 80% RH. Operation of the product outside this range could result in damage to the product. is fitted, exercise care when moving these items so as to avoid risk of entrapment or personal injury. If the product is installed on a cabinet or high capacity feeder, ensure wheel locks are applied once placed in final position for use, to prevent risk of movement or injury. 2 - English Limited Warranty, United States Oki Data Americas, Inc. (Oki Data) warrants this ML6300F-SC (hereinafter "the Product") to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited Warranty. This Limited Warranty does not extend to consumable items, including but not limited to ribbons, fuses, etc. Oki Data will repair (or at its option, replace) at no charge, any defective component(s) of the Product for a period of one (1) year from date of purchase. To make request or claim for service under this Limited Warranty, contact your Oki Data Authorized service center or Oki Data at 1-800-OKI-DATA (1-800-654-3282) or at www. okiprintingsolutions. com. [. . . ] Preventive Measures _________________________ Personal Protective Equipment Respiratory Protection: None. Spill Cleanup If ribbon is inadvertently released, it should be rewound. Waste Disposal Follow appropriate federal, state and local regulations. User's Responsibility _________________________ This bulletin cannot cover all possible situations which the user may experience when using this product. [. . . ]