User manual OKI MC780FX SETUP GUIDE

[. . . ] User’s Manual Setup Guide This manual contains cautions on how to use this product safety. Before you use this product, please make sure that you read this manual. MC760fdn, MC760dn, MC770fdn, MC770dn, MC770x, MC780fdn, MC780dnf, MC780x, ES7460 MFP, ES7470 MFP, ES7470x MFP, ES7480x MFP, MPS3537mc, MPS4242mc, MPS4242mcf 1 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. [. . . ] --For Windows 7, some tab menus 1 To •• change a network-installed printer have a button in the printer driver properties. Tray 1 — Select the size and type of paper that is loaded in the 1st Tray. Tray 2 — Select the size and type of paper that is loaded in the 2nd Tray. Tray 3 — Select the size and type of paper that is loaded in the 3rd Tray. Tray 4 — Select the size and type of paper that is loaded in the 4th Tray. MPT — Select the type of paper that is loaded in the Multi-Purpose Tray (MPT). Override Application Paper Source Settings — Select this check box to use the paper source setting in the printer driver rather than the application setting. 2 3 Display the [Device Settings] tab menu, and set the following options. The setup items of the printer driver are changed according to the model selected. Option — This option sets whether the following optional devices are installed. Setting the department code When this equipment is managed by department codes, you have to enter yours on the printer driver. This allows a network administrator to check the number of copies printed by specific department members. Also users can check who submitted the print jobs, by touch panel display and monitoring tools. Please ask your administrator whether you should enter the Department Code. 6 ••Trays — This sets whether or not the Paper Feed Unit is installed. €•Finisher — This sets whether or not the Inner ••Setup items differ depending on the model and the option configuration. - 38 - Installing Additional Tray Units •• Note ••If the No Limit Black function is enabled, you do not Memo When the User Management setting is enabled, it is used to manage a print job instead of the Department Code Management setting. In this case, a user name that has been entered to log in to your computer is used for the authentication of the print job. Therefore, you do not need to set your department code to the printer driver but you must register your user name in advance. If your user name is not registered, the print job is processed as an invalid one according to the User Authentication Enforcement setting. Also if a print job is sent in RAW format, it is processed according to the RAW Print Job setting. For more information about the User Authentication Enforcement setting or the RAW Print Job setting, refer to the TopAccess Guide. [. . . ] 6 When placing a document on the platen (glass surface), avoid damaging the glass by following these points. Do •• not press the document against the platen with excessive force, especially when trying to copy a When using a hard object as the document, place it gently on the platen. €• If •• the document has sharp edges, be careful not to scratch the glass. - 72 - About Document Copies Readable Areas of the Document Even characters in the gray area may be unreadable. [. . . ]