User manual OKI LE850DT USER GUIDE

[. . . ] LE840/LE850 User’s Guide PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this manual will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer. [. . . ] For details of the TPCL, refer to the LE840/LE850 External Equipment Interface Manual Regarding how to use the Printer Driver, refer to the Help for the Windows Printer Drivers screen. To gain maximum performance and life from the Cutter Module or Strip Module, periodic cleaning is required. Before starting a cleaning, be sure to TURN OFF the printer to avoid risk of injury. 9 Position and Print Tone Fine Adjustment Power ON This section describes how to fine adjust a print start position, cut/strip position, reverse feed amount, print tone, and ribbon motor torque. Power OFF ONLINE Mode [PAUSE] PAUSE state Hold down [RESTART] User System Mode Hold down [MODE] • • • • • • • • • Reset Parameter setting (⇒Section 2. > Adjusts the feed amount to the print start position Adjusts the cut or strip position. Adjusts the print position in X coordinate (horizontal direction) Adjusts the print tone for thermal transfer printing. Sets a fine adjustment value for the threshold for the reflective sensor (Black mark sensor). Sets a fine adjustment value for the threshold for the transmissive sensor (Gap sensor). One label Print Start Position 3mm Feed Direction One label Print Start Position NOTE: Do not set the fine adjustment value which is larger than the media pitch. When the set value exceeds the media pitch, the printer operation is not guaranteed. Cut position or peel-off position is shifted by fine adjusting the feed amount. Reverse feed amount to the next print start position is fine adjusted. 0mm” position, the print start position after a reverse feed is shifted forward. Feed Direction 3mm Print Start Position after a reverse feed When setting +0. 0mm” position, the print start position after a reverse feed is shifted backward. Feed Direction 3mm Print Start Position after a reverse feed NOTE: Depending on the print conditions, a label may not return to the home position with a reverse feed, even if a reverse feed amount is specified to the same length as the forward feed. On the following conditions, the media may not return to the home position, resulting in an error. € The media pitch is almost the same as the distance between the print head and the media sensors (75. ) • A printer action includes a reverse feed (such as cut issues, strip issues, and automatic forward feed standby. ) To prevent an error from occurring, the reverse feed amount needs to be increased by performing the back feed fine adjustment in the positive (+) direction. Value -15 to 0 +1 to +5 +6 to +10 Print speed All speed 8 ips or less 6 ips or less (7) RBN ADJ. [. . . ] System Mode • • • • • • • • • • • • • Self diagnosis Parameter setting Fine adjustment Test print Sensor adjustment RAM clear Interface setting BASIC mode RFID setting Real Time Clock Z-MODE USB memory Reset Contenido del Menú de Ajuste de Sensores SYSTEM MODE <2>PARAMETER SET <3>ADJUST SET <4>TEST PRINT <5>SENSOR ADJUST Menú Sensor Adjust Parámetro TEMPERATURE REFLECT TRANS. ESPECIFICACIONES DE LA IMPRESORA Modelo Característica LE840Ds LE840Dn LE840Du Tipos de códigos de barras disponibles JAN8, JAN13, EAN8, EAN8+2 digits, EAN8+5 digits, EAN13, EAN13+2 digits, EAN13+5 digits, UPC-E, UPC-E+2 digits, UPC-E+5 digits, UPC-A, UPC-A+2 digits, UPC-A+5 digits, MSI, ITF, NW-7, CODE39, CODE93, CODE128, EAN128, Industrial 2 o 5, Customer Bar Code, POSTNET, KIX CODE, RM4SCC (ROYAL MAIL 4STATE CUSTOMER CODE), GS1 DataBar, Standard 2 of 5 , USPS Intelligent Mail Barcode Códigos de barras bidimensionales Fuentes de letra disponibles Data Matrix, PDF417, QR code, Maxi Code, Micro PDF417, CP Code Times Roman (6 tipos), Helvetica (6 tipos), Presentation (1 tipo), Letter Gothic (1 tipo), Prestige Elite (2 tipos), Courier (2 tipos), OCR (2 tipos), Gothic (1 tipo), Outline font (4 tipos), Price font (3 tipos) 24 x 24 fuente Chino simplificado (sólo modelo CN) Rotaciones Interfaz de comunicación estándar Intertaz opcionales 0, 90, 180, 270 USB, Parallel, Serial USB, LAN USB Interfaz serie Interfaz paralelo Interfaz de expansión I/O RTC & USB Host interface Interface interno LAN inalámbrica Nota: Serial I / F y Wireless LAN I / F son conexión exclusiva Módulo estándar Accesorios opcionales Strip module Módulo cortador Módulo de despegado y rebobinador interno Módulo cortador y el módulo de la despegado son conexión exclusiva Optional Kit 203-dpi print head 300-dpi print head NOTAS:  Optional Kit 203-dpi print head 300-dpi print head Módulo cortador y el módulo de la despegado son conexión exclusiva NOTAS:  0 Full speed Modo de transferencia: Control transfer, Bulk transfer Velocidad de transmisión: Full speed (12M bps) Número de puertos: 1 Alimentación: 50mA salida Conector: Tipo A SA2- 4 APENDICE 2 INTERFAZ APENDICE 2 INTERFAZ Interfaz de expansión I/O (Opcional) Señal de entrada IN0 a IN5 Señal de salida OUT0 a OUT6 Conector FCN-781P024-G/P o equivalente (Lado del dispositivo externo) Conector FCN-685J0024 o equivalente (Lado de la impresora) Pin Señal I/O Función 1 2 3 4 5 6 7 8 9 10 11 12 IN0 IN1 IN2 IN3 IN4 IN5 OUT0 OUT1 OUT2 OUT3 OUT4 OUT5 Entrada Entrada Entrada Entrada Entrada Entrada Salida Salida Salida Salida Salida Salida ALIMENTAC IÓN AVANCE IMPRESIÓN PAUSA ERROR AVANCE IMPRESIÓN PAUSA Pin 13 14 15 16 17 18 19 20 21 22 23 24 Señal OUT6 N. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ]