User manual OKI LD620D USER GUIDE

[. . . ] The following cables were used to evaluate this product to achieve EMC directive 2004/108/EC compliance and configurations other than this may affect that compliance. 8 CORE     SHIELD     -2- MANUFACTURER Oki Data Corporation, 4-11-22 Shibaura, Minato-ku, Tokyo 108-8551, Japan For all sales, support and general enquiries contact your local distributor. IMPORTER TO THE EU/AUTHORISED REPRESENTATIVE OKI Europe Limited (trading as OKI Printing Solutions) Blays House Wick Road Egham Surrey, TW20 0HJ United Kingdom For all sales, support and general enquiries contact your local distributor. 0 -4- LD620D ■ Manual Information ※ Manual Information & Usage Precautions This user’s guide contains basic information for product usage as well as for emergency measures that may be required. [. . . ] Contact the dealer from which the purchase was made if any item is damaged and/or missing. Installation & Usage ※ CAUTION - Be careful not to get your fingers pinched when opening or closing the paper cover. - When loading roll paper, be careful not to get your fingers pinched between the paper roll and the supply unit. OFF Power Switch AC Adapter Power Cord 1) Turn off the printer power switch. 2) Check to see that the AC adapter voltage matches that of the power source. This printer supports the following communications interface standards. - RS-232C (Serial) - IEEE1284 (Parallel) - USB USB Cable IEEE1284 (Parallel) Cable RS-232 (Serial) Cable 1) Turn off the power switch. 2) Connect the communication cable to the printer communication port to be used. g SUN SAM TER IN PR BL AE L 3) Keep note of paper printing direction. G UN AS SM R NTE PRI BEL LA 5) Close the Paper Cover until a click sound is heard. 0 - 14 - LD620D 3-4 LED Display Feed button LED Paper feed or cancel the print job. (Refer to below) The current printer status can be viewed via the printer’s LED display. 1) Green LED on - The printer waits for the data from Host (PC) in normal mode. It becomes on when the printer fails to detect the paper or paper jam occurred. When fails to detect the paper correctly use Auto-Calibration function. 4) Green LED blinking - TPH (Thermal Printing Head) overheated or ; - The printers is waiting for the button input to run Auto-Calibration function. 0 - 15 - LD620D 3-5 Feed Button Operations Feed Button can be used for various purposes as follows. 1) Feed Label In Print Standby mode, pressed for shorter than 3 seconds, the printer feed one label. 2) Stand-alone Configuration Mode In Print Standby mode, pressed for longer than 3 seconds, the printer enters into Standalone Configuration Mode. 3) Pause and Resume printing If pressed while printing labels, Printing toggled between Pause and Resume. (Users cannot perform this procedure if using the printer’s label peel-off option. ) If the printer does not function properly, contact an authorized dealer. [. . . ] 2) After cleaning the head, do not use the printer until the alcohol used for cleaning evaporates completely (1~2 min) and the printer has completely dried. €» Perform the cleaning process each time the paper roll is replaced to prevent print quality deterioration. 0 - 23 - LD620D 6-2 Cleaning Sensors, Roller or/and Paper Path 1) Open the Paper Cover and remove the paper. 2) Remove any dust or foreign substance using dry cloth or cotton swab. [. . . ]