User manual OKI LD610UPS USER GUIDE

[. . . ] €» The following separate manuals provide more detailed content on various technological issues and areas. Windows Driver Manual This manual provides information on the installation instructions and main functions of the Windows Driver. Unified Label Utility-II Manual This manual provides information on the usage of software for function selection of this product, operating condition modification, etc. True Font Downloader Manual This manual provides information on the usage of the font downloader that can downloade True Fonts and facilitate their usage as Device Fonts. [. . . ] PRINTER PROHIBIT ED DISASSEMBLING PROHIBITED PRINTER Do not let water or other foreign objects in the printer. €¢ If this happened, switch off and unplug the printer before calling your dealer. €¢ Switch off and unplug the printer before calling your dealer. 0 -7- LD610UPS ■ Other Precautions The copyright for this user’s guide and various other manuals is property of the Oki Data Corporation. Any copying or conversion into electronic firm and saving of this material without the express written permission of Oki Data Corporation. Use of the information contained in this manual is not subject to any patent liability. This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions. Is not legally liable for any damages resulting from the use of the information in this manual. And its affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or expenses that result from the breakdown, malfunction, and/or misuse of the product due to violation or neglect of the operation and maintenance information and instructions provided by the Oki Data Corporation. , as well as from the unauthorized alteration, repair, and/or modification of the product by the user and/or third party. Is not legally liable for any damages and/or issues resulting from the use of options and/or parts that are not authentic Oki Data products or authorized products. ) If the printer does not function properly, contact an authorized dealer. The self-test checks the following; 1) Make sure that the paper roll has been installed properly. (It takes about 5 seconds before starting self-test) 3) The self-test prints the current printer configuration information. 4) After the self-test results are printed out, a printer enters into Print Standby Mode. Detailed features 5-1 Stand-alone Configuration Mode Various modes can be executed by using button and LED status. Please take following steps to start Stand-alone Configuration Mode and execute each function. 2) Depress the Feed button for about 3 seconds, then the LED changes to orange color. 3) Release the Feed button, then the printer starts the Standalone Configuration Mode and 6 numbers of LED status changes sequentially. 4) When the Feed button is depressed at specific LED status, the corresponding operation will be executed. LED Sequence Printer Operation Number Color Status 1 Green Blink 3 times NONE 2 Orange Blink 3 times Factory Reset and Gap Calibration 3 RED Blink 3 times Factory Reset and Black Mark Calibration 4 Green Keep On NONE 5 Orange Keep On Data Dump Mode 6 Red Keep On Demo Mode * This information can be printed out by printer self-test. 5-2 Media Length Measurement The printer needs to have the exact length of currently installed paper to make a proper print image. [. . . ] 0 - 19 - LD610UPS 5-6 Data Dump Mode This function can be used to diagnose the communication issues when the printer does not work correctly. In this mode, the received data are not analyzed and printed, instead they are dumped in hex format without processing. Use Stand-alone Configuration Mode, Sequence Number 5(refer to 5-1) to start Data Dump Mode 5-7 The Peel-Off This function is used to automatically separate labels from the liner. - When the peeler switch is on, labels are not printed if previous printed labels have been removed from the peeler. [. . . ]