User manual NUMARK UPM OPERATING MANUAL

[. . . ] c) Heed Warnings - All warnings on this product and in these operating instructions should be followed. d) Follow Instructions - All operating and other instructions should be followed. e) Water and Moisture - This product should be kept away from direct contact with liquids. m) Damage Requiring Service - Only qualified personnel should service this product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual. [. . . ] See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get. Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to an authorized Numark Service Center. Begin with master faders or volume controls on minimum and the amplifier gain/input control(s) down. Avoid amplifier "clipping" at all costs: this occurs when the red LEDs (usually on the front panel of most professional power amplifiers) start flashing. "Clipping" is when the power amplifier is distorting and working beyond it's limits. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or anything wet on top of the unit! - Consumer Products Division ©1999 Numark Industries -5- http://www. numark. com The Ultimate Party Machine ULTIMATE PARTY MACHINE FEATURES CD Player Features 1. START/PAUSE (Play/Pause Button) - Each press of the Play/Pause Button causes the operation to change from play to pause or from pause to play. FORWARD/REVRSE SEARCH ­ Used to advanced or back up on the selected track to a desired play point. DISPLAY - Switches the time display between elapsed playing time and remaining time on the track and remaining time on the entire CD. LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. mounting plate back onto the unit - you're back in business!Stereo Master EQ ­ Adjust final master output equalization of treble, middle, and bass 18. Headphone Jacks ­ Used to connect 1/4" plug for audio monitoring with headphones 20. Channel Cue Selector - Used to route channel audio to your headphones Mixer Features 10. Input toggle switch - Selects which source will be live to that channel based on what you have connected to the rear panel input section 12. Replaceable Crossfader - Achieves clean segues between the two input channels. Use the crossfader for fast and seamless segues from one selected channel to the other Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws which hold it in place, lift it out and disconnect it's cable. Re-attach the new crossfader and screw the Rear Panel Features 30. Speaker outputs ­ Plug your 1/4" speaker cables in here and into the rear of your speakers 31. Stereo Main Outputs - Unbalanced RCA connectors controlled by the Master fader. - Consumer Products Division ©1999 Numark Industries -6- http://www. numark. com The Ultimate Party Machine 32. [. . . ] SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER. You may also have other rights, which vary from one jurisdiction to another. 2. 8. RETURN INFORMATION a) b) c) d) e) f) g) A Return Authorization number must be obtained from Numark through the address or phone numbers below. A copy of the original sales receipt must also be included for the equipment to be repaired under warranty. [. . . ]