User manual NUMARK CDN24S Operating Manual

[. . . ] ® Professional Disc Jockey Products CDN-24S PROFESSIONAL DUAL CD PLAYER OPERATING MANUAL ©1999 Industries http://www. numark. com CDN-24S Safety Information and Product Registration CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. 7. Ventilation - The appliance should be situated so that it's location or position does not interfere with it's proper ventilation. [. . . ] a) The jog wheel will act as a slow frame search control when the CD is not playing but either paused or set to a cue point. To set a new frame cue point, spin the wheel then press play when you have determined the proper position. When this is not lit the CD will play continuously through all tracks. TIME BAR - Shows either time remaining or elapsed depending on the setting of the TIME BUTTON (4). MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. The unit should always be shut down with this button first before any external power is removed. RCA AUDIO JACKS - Connect your CD player to your mixer from this line level output. IEC POWER CONNECTOR - Plug your supplied power cord into here then plug unit into a power outlet. CONTROL CONNECTOR - Plug your control cables for each unit into here and the back of the remote unit. DIGITAL OUTPUTS - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you must set the digital output selector to on. This will deactivate the variable pitch slider and the pitch bend buttons or pitch wheel. If you were able to adjust the pitch, other devices will not read the digital output properly. - The Leader in DJ Technology ©1999 Numark Industries -9- http://www. numark. com CDN-24S DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS PLAY, PAUSE and CUE Pressing the "PLAY/PAUSE" button starts the disc. Pressing the "CUE" button will reset the disc to the last place where the disc was started. By alternately pressing the "PLAY/PAUSE" button and the "CUE" button, the disc may be returned and played from the cue point any number of times. This function is called back cue. EDITING CUE POINT When the inner search dial is turned while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the CD as you move it to the desired position. By pressing "PLAY/PAUSE" then "CUE" you can confirm that this new cue point is desirable USING THE LOOP The loop function is for repeating certain areas of the CD, such as vocal stabs or for allowing the beginning of a song to repeat itself. Using the loop function allows you to leave the DJ console and interact directly with your crowd. There are 3 button associated with the loop feature IN, OUT and RELOOP The "LOOP IN" in button LED will light up as soon as a track is cued up. [. . . ] To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return authorization number ("RA#"). Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. [. . . ]