User manual NUMARK CDN-90

[. . . ] Premium CD Player MANUAL ©2002 Industries http://www. numark. com CDN90 SAFETY INSTRUCTIONS a) b) c) d) e) f) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed. [. . . ] By default the "LOOP IN" also becomes the "STUTTER" or "HOT START" point. NOTE: The CD Player will always remember a new set point as the "LOOP IN" or "HOT START" point until you actually set a new "LOOP IN" point or put in a new CD. The new point will be accessible until you remove the CD from the unit. If you change tracks and you previously set a "Loop In" on another track, pressing will jump to that point. LOOP OUT: The "LOOP OUT" determines the end point for a loop. The first time you press while a CD is in play mode, the "LOOP OUT" LED will turn on and flash while the song automatically returns to the "LOOP IN" point with no breaks and continues to play. When the song reaches the "LOOP OUT" point again it returns to the "LOOP IN" point and continues to repeat this action. You will notice the "LOOP IN" LED will also be flashing during loop action. To release or end the LOOP press a second time and play will continue forward when the song passes the previously set "LOOP OUT" point. The "LOOP OUT" LED will be lit solid indicating that the "LOOP" is now in memory for "RELOOP" purposes. Note: The "LOOP OUT" point will be erased if "LOOP IN" is pressed or a new "CUE" point is set after the "LOOP OUT" point. This is important because without this point "RELOOP" will not be possible. SMART LOOPING: The Beatkeeper and Looping can work together to set perfect loops every time. In order to work correctly first properly align the BeatkeeperTM on the beat. After this has been done all loop points and stuttering will play perfectly to the beat of the music. at the - The Leader in DJ Technology ©2002 Numark Industries - 14 http://www. numark. com CDN90 MOVING LOOP POINTS: The "LOOP IN" point can be moved while the music is playing at the new desired just by pressing point. The next time "LOOP OUT" is reached the CD will return to this new "LOOP IN" point. If "LOOP IN" is press after the "LOOP OUT" point it will clear the "LOOP OUT" point. First hold down press then to move to the loop in point. Next rotate the wheel to search for a new again to set cue point and then press the new point. Check your point by pressing . The "LOOP OUT" point can also be moved while to release the old a loop is playing. Press "LOOP OUT" point and pressing it again at the new desired point. RELOOP/STUTTER This button performs 2 different functions depending on loop setting. Reloop is only possible if "LOOP" points have been previously set. The "RELOOP" function automatically returns the music to the "LOOP IN" point and will play the loop until it is released with the "LOOP OUT" button. Stutter starts instant play from previously set "Hot" points. Simply set your stutter (Hot Start) point by follow the directions for setting loop in because the points are the same. [. . . ] Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for (90) days, whichever is longer. [. . . ]