User manual NUMARK CD MX-1

[. . . ] ® Professional Disc Jockey Products CD MIX-1 PROFESSIONAL CD MIXING CONSOLE OPERATING MANUAL ©1999 Industries http://www. numark. com CD MIX-1 Safety Information and Product Registration CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. (7) Ventilation - The appliance should be situated so that it's location or position does not interfere with it's proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a builtinstallation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings. [. . . ] PROGRAM - Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and press the PROGRAM button between selections. To exit and erase program, either hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power. PITCH SLIDER - The pitch can be changed up to +/-12% by pressing the PITCH button so the PITCH b) When both CD players are playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched. TIME BAR - Shows either time remaining or elapsed depending on the setting of the TIME BUTTON. MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting. - The Leader in DJ Technology ©1999 Numark Industries -8- http://www. numark. com CD MIX-1 MIXER FEATURES 1. Input toggle switch - Selects which source will be live to that channel based on what you have connected to the rear panel input section 3. Replaceable Crossfader - Achieves clean segues between the two input channels. Use the crossfader for fast and seamless segues from one selected channel to the other Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws which hold it in place, lift it out and disconnect it's cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you're back in business!Fader Start ­ Activation allows you to start the CD players from you crossfader. Travel from left to right will start the right CD player and pause the left CD player 5. Stereo/Mono toggle - Changes the Master output between Mono and Stereo 9. Stereo EQ ­ Adjust final master output equalization of treble, middle, and bass 10. Channel Cue Selector - Used to route channel audio to your headphones 12. Headphone Jacks ­ Used to connect either 1/8" or 1/4" plugs for audio monitoring with headphones - The Leader in DJ Technology ©1999 Numark Industries -9- http://www. numark. com CD MIX-1 REAR PANEL FEATURES 1. Channels Inputs - Unbalanced RCA jacks for connecting external sources. The Phono/Line Input is selected with the toggle switch on the front panel. [. . . ] To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return authorization number ("RA#"). Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. [. . . ]