User manual NORDICTRACK NTTL09510

[. . . ] Serial Number Decal USER'S MANUAL QUESTIONS? If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our Customer Hot Line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-888-825-2588 Mon. ­Fri. , 6 a. m. ­6 p. m. [. . . ] The speed and incline settings that you programmed and the number of completed segments will be stored in memory. To use the custom program, see HOW TO USE CUSTOM PROGRAMS on page 15. 6 Remove the key. See step 6 on page 13. 14 HOW TO USE CUSTOM PROGRAMS 1 2 Insert the key fully into the console. When the key is inLearn Indicator serted, the manual mode will be selected and the Manual indicator will light. To select one of the custom programs, press the Select Program button repeatedly until the Learn 1 or Learn 2 indicator lights. When a custom program is selected, the program display will show a simplified profile of the program. The Time/Laps display will show how long the program will last. column and the column to the right will flash, a series of tones will sound, and all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the speed and incline settings that you programmed previously. The program will continue until the speed setting for the last segment is shown in the Current Segment column and no time remains in the Time/Laps display. Note: If the program is too easy or too difficult, the speed or incline setting for the current segment can be adjusted with the Speed or Incline buttons. To reprogram the speed or incline setting for the current segment, press the Record button. Speed and incline settings can be programmed only when the indicator is lit. (Note: When the indicator on the Record button is lit, the Time/Laps display will show the elapsed time instead of the time remaining in the program. ) Adjust the speed or incline setting for the current segment with the Speed or Incline buttons. All displays will pause and the Time/Laps display will begin to flash. To restart the program, press the Start Program button or the Speed + button. To end the program, press the Stop button, remove the key, and then reinsert the key. 3 Press the Start Program button or the Speed + button to start the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings for the program. The Time/Laps display shows both the time remaining in the program and the time remaining in the current segment. One speed setting and one incline setting are programmed for each segment. The speed setting for the Current Segment first segment will be shown in the flashing Current Segment column of the program display. (The incline settings are not shown in the program display. ) The speed settings for the next five segments will be shown in the five columns to the right. When only three seconds remain in the first segment of the program, both the Current Segment 4 5 6 Follow your progress with the displays. [. . . ] WHO IS COVERED--The original purchaser or any person receiving the Product as a gift from the original purchaser. ("ICON"), warrants the motor for three years after the date of purchase. The belt and deck are covered for two years after the date of purchase. All mechanical components are covered for two years after the date of purchase. [. . . ]