User manual NITECORE TM15

[. . . ] In special circumstances, such as emergency situations, between one and three 18650 Li-ion or two and six CR123 batteries may be used. After loading the batteries, the power indicator light will blink to indicate the battery voltage. Please refer to the “Power Tips” section of this manual for details. and quickly · Exceptionally long runtimes using 4 × 18650 Li-ion or 8 × CR123 batteries · Capable of using 1 × 18650 or 2 x CR123 batteries in emergency situations · Innovative single button two-stage switch provides a user-friendly interface (Patented) · Integrated power indicator light displays remaining battery power (Patented) · Power indicator secondary function displays battery voltage (accurate to 0. 1V) · Coated mineral glass resists scratches · Aluminum reflector ensures a consistent and powerful beam · Stainless steel retaining ring protects the core components from damage · Constructed from aircraft grade aluminum alloy · HA III Military grade hard-anodized · IPX-8 standard waterproof (two meters) Dimensions Length: 158mm Head diameter: 60 mm Tube diameter: 50mm Weight: 447g (without battery) Accessories Charger, quality holster, lanyard, spare O-ring Note: The potential risks of over-discharging batteries can include leakage and explosion so caution must be exercised when using less than 4 x 18650 or 8 x CR123. [. . . ] Under normal charging conditions, fully or half press the switch the power indicator light will blink to indicate the battery voltage. Please refer to the “Power Tips” section of this manual for details. Power Tips General Operation Switching ON/OFF NB: The TM15 utilizes a 2-stage switch similar to a camera shutter button. The light’s numerous functions are selected according to the depth the switch is pressed. With the light turned off: ·Press the switch partway down and hold to enter Momentary Daily mode. ·Press the switch all the way down and hold to enter into Momentary Turbo mode. ·Press the switch partway down and release within one second to access Constant Output Daily mode. ·Press the switch all the way down and release within one second to access Constant Turbo mode. When the light is on, the blue power indicator will blink once every two seconds when power levels reach 50%. When the light is on, the blue power indicator will flicker constantly when power is very low. Each time batteries are inserted, the light is put into lockout Mode or half/fully press the switch under normal charging conditions, the power indicator light will blink in various patterns to show the battery voltage (accurate to ±0. 1V). For example, when the battery voltage is at a maximum charge of 4. 2V, the power indicator will blink 4 times in quick succession, followed by a one second pause and two more blinks, indicating a total battery voltage of 4. 2V. Thermal protection Standby mode With the light turned on: Press the switch all the way down and release within one second to enter into standby mode. In this mode, the light will consume small amounts of power to maintain the settings in the MCU (micro control unit) but appear to be turned off. When in standby mode the power indicator light will flash once every three seconds to show the location of the light. TM15 is very compact. Extended operation in Turbo mode will cause the body temperature to continually rise, thus, making it too hot to use. So NITECORE does not recommend using the TM15 in Turbo mode for extended periods. For your safety and to protect the flashlight from failure, the TM15 will automatically reduce its output to prevent overheating once it has reached 60 degrees. [. . . ] DOA / defective products can be exchanged for replacement through a local distributor/dealer within the 14 days of purchase. After 14 days, all defective / malfunctioning NITECORE® products will be repaired free of charge for a period of 18 months from the date of purchase. After 18 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. [. . . ]