User manual NITECORE P25 SMILODON

[. . . ] ® ALL-ROUND Flashlight Expert P25 TURBO LUMENS User Manual HIGH MID LOW LOWER Features · Premium CREE XM-L U2 LED · Maximum output of 860 lumens · Integrated “Precision Digital Optics Technology” provides extreme Output & Runtime 860 LUMENS 550 2h reflector performance · Boasts a peak beam intensity of 20, 000cd and a throw distance of up to 283 meters · High efficiency circuit board provides up to 325 hours runtime · Integrated dual Picatinny connectors / rails provide a huge variety of mounting options · Innovative single button two-stage switch offers a user-friendly interface (patented) · Intelligent charging circuit with voltage detection charges safely and rapidly · Integrated micro USB charging port is water, dust and impact resistant · Eight rapidly switchable brightness levels to select from · Integrated power indicator light displays remaining battery power (patented) · Power indicator’s secondary function displays battery voltage (accurate to 0. 1V) · Intelligent charging circuit with voltage detection charges rapidly and safely · Intelligent memory function stores preferred brightness setting · Integrated spring-loaded impact absorption mechanism featuring reverse polarity protection (patented) · Stainless steel titanium-plated two-way clip · Stainless steel retaining ring protects the core components from damage · Toughened ultra-clear mineral glass with anti-reflective coating · Constructed from aero grade aluminum alloy · Sturdy HAIII military grade hard-anodized · Waterproof in accordance with IPX-8 (two meters submersible) · Impact resistant to 1. 5 meters · Tail stand capability LUMENS 180 7h LUMENS 50 LUMENS 2 NOTICE The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using one x 3. 7V 2600mAh Nitecore 18650 battery and 2 x 3V 1550mAh Nitecore CR123 batteries under laboratory conditions. The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors. NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI/NEMA FL1 standard of measurement. [. . . ] Tips: The P25 needs to be turned on using the tail cap switch in order enter charging mode. Warning: USB charging functionality is designed for 18650 rechargeable li-ion only. Do not attempt to charge non-rechargeable batteries such as CR123 or other types of rechargeable cells such as RCR123 batteries. Operating in Turbo Mode: With the light turned on, press the switch partway down and hold to activate turbo mode. Note: For user safety and to prevent overheating / failure, the P25 will automatically switch to high mode after twenty minutes of use in Turbo mode. Press the switch partway and hold to reactivate turbo mode when needed. Power Tips Standby Mode With the light turned on or in the standby mode, press the switch all the way down and release within one second to enter into standby mode. In this mode, the light will consume small amounts of power to maintain the settings in the MCU (micro control unit) but appear to be turned off. When in standby mode the power indicator light will flash once every two seconds to show the location of the light. To exit standby mode, simply press the two-stage switch all the way down or press the tail switch to turn the light off. Tips: When in standby mode，the P25 can also be used as a side-switch flashlight, all functions and brightness levels can be easily accessed via the 2-stage switch. 1. With the light switched on, the power indicator will blink once every two seconds when power levels reach 50%. With the light switched on, the power indicator will blink rapidly when power levels are low. Half press the switch when the light is put into standby mode or under charging mode, the power indicator light will blink in various patterns to indicate the battery voltage (accurate to ±0. 1V). For example, when the battery voltage is at a maximum charge of 4. 2V, the power indicator will blink 4 times in quick succession, followed by a one second pause and two more blinks, indicating a total battery voltage of 4. 2V. Changing / Charging Batteries Special Strobe / SOS mode and Location Beacon When the power indicator blinks rapidly it means the batteries need to be replaced or recharged. Alternatively if the light becomes dim or unresponsive to adjustment this also indicates batteries need to be replaced or recharged. With the light turned on, press the switch all the down and hold to enter strobe mode. When in strobe mode, press the switch partway down to cycle through SOS, location beacon and strobe modes. To select any of these modes simply release the switch when it is displayed. To turn off the light (enter into standby mode) fully press and release the switch. Maintenance Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant. Warranty Service Charging Function The P25 is capable of charging a protected 18650 li-ion battery via the included USB cable. [. . . ] Under normal charging conditions, the blue indicator light will blink once every 0. 5 second. If a problem is detected during the charging process, the P25 will stop charging and the blue indicator will blink rapidly. This is usually caused by a faulty / incorrectly inserted battery, or if the light has not been turned on using the tail cap switch. SYSMAX Industry Co. , Ltd. TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: info@nitecore. com Web: www. nitecore. com Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road, Guangzhou, China 510600 Thanks for purchasing NITECORE! [. . . ]