User manual NISSAN VERSA SEDAN 2009

[. . . ] It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. A separate Warranty Information Booklet explains details about the warranties covering your vehicle. The "NISSAN Service and Maintenance Guide" explains details about maintaining and servicing your vehicle. [. . . ] RPT ALL DISC: All discs will be played normally, with no special play pattern enabled. MP3 RPT/RDM mode: When the RPT/RDM button is pressed while an MP3 compact disc is played, the play pattern can be changed as follows: RPT DISC RPT FOLDER RPT TRACK RDM ALL DISC RDM DISC RDM FOLDER RPT ALL DISC RPT DISC RPT DISC: The disc that is currently playing will be repeated. RPT FOLDER: The folder selected that is currently playing will be repeated. RDM DISC: The discs loaded into the CD changer will be selected randomly. RPT ALL DISC: All discs will be played normally, with no special play pattern enabled. EJECT button: Current disc: Press the slot number (1 ­ 6) for the desired disc, then press the button. button is pressed twice, When the the CD will be ejected further for easier CD removal. If the disc is not removed within 15 seconds, the disc will reload. SCAN button: While listening to a CD, press the SCAN button to preview the first 10 seconds of each track on the current CD playing. Pressing the SCAN button during this 10 second period stops the scan and the CD remains on that track. Press the SCAN button for more than 1. 5 seconds to preview 10 seconds of the first track on each disc, only if more than 1 disc is loaded into the CD changer. Pressing the button again during this 10 second period will stop the scan and the CD that was being previewed will remain on and will continue the regular playback. Heater, air conditioner, audio and phone systems 4-25 All discs: button for more Press and hold the than 1. 5 seconds. If a disc is not removed within 15 seconds, or the button is pressed again during the eject sequence, the entire disc eject sequence will be canceled. When this button is pressed while the compact disc is being played, the compact disc will eject and the last source will be played. CD IN indicator: The slot numbers (1 ­ 6) will illuminate if CDs have been loaded into the changer in CD mode only. The AUX audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or a laptop computer. Press the AUX button to play a compatible device when it is plugged into the AUX jack. LHA0049 A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. CD CARE AND CLEANING Handle a CD by its edges. Always place the discs in the storage case when they are not being used. To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not use a conventional record cleaner or alcohol intended for industrial use. 4-26 Heater, air conditioner, audio and phone systems STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel. Tuning Memory change (radio): While in one of the preset radio station banks (A, or B or C), push the tuning switch for less than 1. 5 seconds to change to the next preset station in memory. Seek tuning (radio): Push the tuning switch or for more than 1. 5 seconds to seek the next or previous radio station. Next/Previous track (CD): Push the tuning switch or for less than 1. 5 seconds to return to the beginning of the present track or skip to the next track. [. . . ] Many insurance companies routinely authorize the use of non-genuine collision parts in order to cut costs, among other reasons. Why should you take a chance? In over 40 states, the law says you must be advised if non-genuine parts are used to repair your vehicle. And some states have enacted laws that restrict insurance companies from authorizing the use of non-genuine collision parts during the new vehicle warranty. These laws help protect you, so you can take action to protect yourself. Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN's original exacting specifications ­ if you want to help it to last and hold its resale value, the solution is simple. Tell your insurance agent and your repair shop to only use Genuine NISSAN Collision Parts. [. . . ]