User manual NISSAN VERSA-2007

[. . . ] It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. A separate Warranty Information Booklet explains details about the warranties covering your vehicle. The "NISSAN Service and Maintenance Guide" explains details about maintaining and servicing your vehicle. [. . . ] button is pressed for less than When the 1. 5 seconds while the compact disc is playing, the next track will start to play from its beginning. The compact disc will advance the number of times the button is pressed. (When the last track on the compact disc is skipped through, the first track will be played. ) TUNE/FF·REW/FOLDER: While playing an MP3, press the TUNE/FF·REW/FOLDER button or to scan forward or backward through available folders. To fast forward or rewind through an audio track, press the TUNE/FF·REW/FOLDER button or for more than 1. 5 seconds. SCAN button: While listening to a CD, press the SCAN button to preview the first 10 seconds of each track on the current CD playing. Pressing the SCAN button during this 10 second period stops the scan and the CD remains on that track. Press the SCAN button for more than 1. 5 seconds to preview 10 seconds of the first track on each disc, only if more than 1 disc is loaded into the CD changer. Pressing the button again during this 10 second period will stop the scan and the CD that was being previewed will remain on and will continue the regular playback. CD select buttons: To play another CD that has been loaded, press a CD select button (1 ­ 6). RPT/RDM button: When the RPT/RDM button is pressed while the compact disc is played, the play pattern can be changed as follows: RPT DISC RPT TRACK RDM ALL DISC RDM DISC RPT ALL DISC RPT DISC RPT DISC: The disc that is currently playing will be repeated. RDM DISC: Tracks from the disc that is currently playing will be played randomly. RPT ALL DISC: All discs will be played normally, with no special play pattern enabled. MP3 RPT/RDM mode: When the RPT/RDM button is pressed while an MP3 compact disc is played, the play pattern can be changed as follows: RPT DISC RPT FOLDER RPT TRACK RDM ALL DISC RPT ALL DISC RPT DISC RPT DISC: The disc that is currently playing will be repeated. RPT FOLDER: The folder selected that is currently playing will be repeated. RPT ALL DISC: All discs will be played normally, with no special play pattern enabled. EJECT button: Current disc: Press the slot number (1 ­ 6) for the desired disc, then press the button. When the button is pressed twice, the CD will be ejected further for easier CD removal. If the disc is not removed within 15 seconds, the disc will reload. 4-24 Heater, air conditioner, audio and phone systems All discs: Press and hold the button for more than 1. 5 seconds. If a disc is not removed button is within 15 seconds, or the pressed again during the eject sequence, the entire disc eject sequence will be canceled. When this button is pressed while the compact disc is being played, the compact disc will eject and the last source will be played. CD IN indicator: The slot numbers (1 ­ 6) will illuminate if CDs have been loaded into the changer in CD mode only. The AUX audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computers. Press the AUX button to play a compatible device when it is plugged into the AUX jack. LHA0049 LHA0660 CD CARE AND CLEANING Handle a CD by its edges. Always place the discs in the storage case when they are not being used. [. . . ] Using Genuine NISSAN Parts can help protect your personal safety, preserve your warranty protection and maintain the resale value of your vehicle. And if your vehicle was leased, using Genuine NISSAN Parts may prevent or limit unnecessary excess wear and tear expenses at the end of your lease. 9-20 Technical and consumer information NISSAN designs its hoods with crumple zones to minimize the risk that the hood will penetrate the windshield of your vehicle in an accident. Nongenuine (imitation) parts may not provide such built-in safeguards. Also, non-genuine parts often show premature wear, rust and corrosion. Why should you take a chance? In over 40 states, the law says you must be advised if non-genuine parts are used to repair your vehicle. [. . . ]