User manual NISSAN ROGUE 2011

[. . . ] It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. A separate Warranty Information Booklet explains details about the warranties covering your vehicle. The NISSAN Service and Maintenance Guide explains details about maintaining and servicing your vehicle. [. . . ] It may take some time to receive the activation signal after subscribing the XM Satellite Radio. After receiving the activation signal, an available channel list will be automatically updated in the radio. For XM, place the ignition switch from LOCK to ACC to update the channel list. FM-AM-SAT radio operation radio (FM/AM) band select: Pushing the radio band select button will change the band as follows: AM ?AM Push the TUNE control dial to adjust Bass and Treble to the desired level. Fade adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers. To change the Speed Sensitive Volume (Spd radio (SAT) band select: Pushing the radio band select button will change the band as follows: Audio main operation Head unit: The auto loudness circuit enhances the low and high frequency ranges automatically in both 4-40 Center display, heater, air conditioner, audio, phone and voice recognition systems SEEK tuning/CATEGORY (CAT): When the radio band select button is pushed while the ignition switch is in the ACC or ON position, the radio will come on at the channel last played. The last channel played will also come on when the ON·OFF button is pushed to ON. If another audio source is playing when the radio band select button is turned to ON, the audio source will automatically be turned off and the last radio channel played will come on. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception. For XM Satellite Radio Turn the radio TUNE dial to seek channels from all of the categories when any category is not selected. For AM and FM radio Push the SEEK button or to tune from low to high or high to low frequencies and to stop at the next broadcasting station. For XM Satellite Radio Push the SEEK button or to tune to the first channel of the next or previous category. SCAN tuning: Push the SCAN tuning button to tune from low to high frequencies and stop at each broadcasting station/channel for 5 seconds. Pushing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station/channel. If the SCAN tuning button is not pushed within 5 seconds, SCAN tuning moves to the next station/channel. 1 * 1. Tune to the desired station/channel using the SEEK/CAT, SCAN button or the radio TUNE dial. Push and hold the desired station preset 1 6 button * to * until the radio mutes. If the battery cable is disconnected, or if the fuse opens, the radio memory will be erased. In that case, reset the desired stations/channels. Compact Disc (CD) player operation Place the ignition switch in the ACC or ON position and insert the Compact Disc (CD) into the slot with the label side facing up. After loading the CD, the number of tracks on the CD and the play time will appear on the display. If the radio is already operating, it will automatically turn off and the CD will play. to 6 * Station memory operations: 12 stations/channels can be set for the FM band (6 each for FM1 and FM2), 12 for XM radio (6 each for XM1 and XM2) and 6 stations can be set for the AM band. Center display, heater, air conditioner, audio, phone and voice recognition systems 4-41 If the system has been turned off while the CD was playing, pushing the ON·OFF button will start the CD. PLAY: When the CD button is pushed with the system off and the CD loaded, the system will turn on and the CD will start to play. [. . . ] NISSAN designs its hoods with crumple zones to minimize the risk that the hood will penetrate the windshield of your vehicle in an accident. Non-genuine (imitation) parts may not provide such built-in safeguards. Also, non-genuine parts often show premature wear, rust and corrosion. It's your right! If you should need further information visit us at: www. nissanusa. com (for U. S. customers) or www. nissan. ca (for Canadian customers) IN THE EVENT OF A COLLISION Unfortunately, accidents do occur. [. . . ]