User manual NISSAN LEAF 2012

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NISSAN LEAF 2012. We hope that this NISSAN LEAF 2012 user guide will be useful to you.


NISSAN LEAF 2012 : Download the complete user guide (3786 Ko)

You may also download the following manuals related to this product:

   NISSAN LEAF 2012 NAVIGATION SYSTEM (6171 ko)
   NISSAN LEAF 2012 QUICK REFERENCE GUIDE (1396 ko)

Manual abstract: user guide NISSAN LEAF 2012

Detailed instructions for use are in the User's Guide.

[. . . ] 2012 LEAF OWNER'S MANUAL For your safety, read carefully and keep in this vehicle. FOREWORD Welcome to the growing family of new NISSAN owners. It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. A separate Warranty Information Booklet explains details about the warranties covering your vehicle. [. . . ] This button is usually located near the antenna wire that hangs down from the motor. If the wire originates from under a light lens, you will need to remove the lens to access the training button. NOTE: Once you have pushed and released the training button on the garage door opener's motor and the "training light" is lit, you have 30 seconds in which to perform step 7. For convenience, use the help of a second person for assistance when performing this step. Quickly (within 30 seconds of pushing and releasing the garage door opener training button) and firmly push and release the HomeLink® button that you have just programmed. Push and release the HomeLink® button up to three times to complete the training. To program the remaining HomeLink® buttons for additional door or gate openers, follow steps 2 through 8 only. Do not repeat step 1 unless you want to "clear" all previously programmed HomeLink® buttons. If you have any questions or are having difficulty programming your HomeLink® buttons, please refer to the HomeLink® web site at: www. homelink. com or call 1-800-3553515. Instruments and controls 2-59 PROGRAMMING HomeLink® FOR CANADIAN CUSTOMERS Prior to 1992, D. O. C. regulations required hand-held transmitters to stop transmitting after 2 seconds. To program your hand-held transmitter to HomeLink®, continue to push and hold the HomeLink® button (see steps 2 through 4 under "Programming HomeLink®" earlier in this section) while you push and re-push ("cycle") your hand-held transmitter every 2 seconds until the indicator light flashes rapidly (indicating successful programming). NOTE: If programming a garage door opener, etc. , it is advised to unplug the device during the "cycling" process to prevent possible damage to the garage door opener components. PROGRAMMING TROUBLE-DIAGNOSIS If HomeLink® does not quickly learn the handheld transmitter information, perform the following steps. Position the hand-held transmitter with its battery area facing away from the HomeLink® surface. Push and hold both the HomeLink® and hand-held transmitter buttons without interruption. CLEARING PROGRAMMED INFORMATION Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release them when the indicator light begins to flash (in approximately 20 seconds). REPROGRAMMING A SINGLE HomeLink® BUTTON To reprogram a HomeLink® Universal Transceiver button, perform the following procedure. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 2 to 5 in (50 to 127 mm) away from the HomeLink® surface. The HomeLink® indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons. The HomeLink® Universal Transceiver button has now been reprogrammed. The new device can be activated by pushing the HomeLink® . OPERATING HomeLink® UNIVERSAL TRANSCEIVER The HomeLink® Universal Transceiver (once programmed) may now be used to activate the garage door, etc. To operate, simply push the appropriate programmed HomeLink® Universal Transceiver button. The red indicator light will illuminate while the signal is being transmitted. Position the hand-held transmitter 2 to 5 inches (50 to 127 mm) away from the HomeLink® surface. [. . . ] 4-2 W Warning Hazard warning flasher switch. . . . . . . . . . . . . . . . . . . . . . . . . . 2-23 Tire pressure monitoring system (TPMS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31 Warning lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Warning/indicator lights and audible reminders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NISSAN LEAF 2012




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NISSAN LEAF 2012 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.