User manual NISSAN ALTIMA-2004

[. . . ] It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. A separate Warranty Information Booklet explains details about the warranties covering your vehicle. The "NISSAN Service and Maintenance Guide" explains details about maintaining and servicing your vehicle. [. . . ] If using the up button, once the highest broadcasting station is reached, the radio continues in the SEEK mode at the lowest broadcasting station. If using the down button, once the lowest broadcasting station is reached, the radio continues in the SEEK mode at the highest broadcasting station. SCAN tuning stops for 5 seconds at each broadcasting station that has sufficient signal strength. Pushing the SCAN button again during this 5 second period stops SCAN tuning and the radio remains tuned to that station. Station memory operation -- Travel Preset is OFF Each preset mode (A, B or C) has 6 presets, capable of storing any combination of AM, FM and FM RDS stations. Press the PRESET ABC button to change between the presets: ABC The radio displays icon A, B or C to indicate which set of presets is active. If the battery cable is disconnected, or if the radio fuse opens, the radio memory is canceled. In that case, reset the desired stations. Turning ON Travel Preset 1. The radio selects the strongest stations in the area and stores them in Travel Presets A, B and C. To change the default settings, see "Editing Travel Preset" later in this section. When finished storing radio stations, the radio tunes to the first stored preset of Travel Preset A. If the radio cannot find any stations, the radio displays "NO STATION" and mutes the audio. If the radio cannot fill all the presets, the remaining presets are stored with 87. 9 for FM and 600 for AM. The TUNE, SCAN, SEEK and preset memory functions are available while Travel Preset mode is on. Heater, air conditioner and audio systems 4-23 Canceling Travel Preset Press the TRAVEL preset button (<1. 5 seconds) to clear the Travel Preset memory. The radio returns to the last used preset of A, B or C in the permanent preset memory. Press and hold the TRAVEL preset button (>3 seconds) until the radio beeps to start the editing mode. The radio displays "TRAVEL EDIT" for 2 seconds and then changes to "SET A-*" . While in Travel Preset mode, press and hold the TRAVEL preset button until it beeps (>3 seconds). The presets are transferred from Travel Preset memory to the permanent preset memory for A, B, and C. The TRAVEL preset indicator turns off. be displayed according to the option chosen in the RDS setup mode. (FM & RDS is the default. ) Press the RDS button again to display the frequency for 3 seconds. If the station does not broadcast RDS information, the RDS icon will not be displayed. Setting RDS mode Press and hold the MENU button (>2 seconds) until the radio beeps to start the editing mode. [. . . ] These laws help protect you, so you can take action to protect yourself. It's your right! If you should need further information visit us at: www. nissanusa. com. IN THE EVENT OF A COLLISION Unfortunately, accidents do occur. In this unlikely event, there is some important information you should know. Many insurance companies routinely authorize the use of non-genuine collision parts in order to cut costs, among other reasons. 9-22 Technical and consumer information 10 Index A Air bag (See supplemental restraint system) . . 9-11 Air conditioner system refrigerant and lubrication recommendations . [. . . ]