User manual NISSAN 2008 ROGUE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NISSAN 2008 ROGUE. We hope that this NISSAN 2008 ROGUE user guide will be useful to you.


NISSAN 2008 ROGUE : Download the complete user guide (4556 Ko)

Manual abstract: user guide NISSAN 2008 ROGUE

Detailed instructions for use are in the User's Guide.

[. . . ] It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. A separate Warranty Information Booklet explains details about the warranties covering your vehicle. The NISSAN Service and Maintenance Guide explains details about maintaining and servicing your vehicle. [. . . ] The compact disc will go back the number of times the button is pushed. SCAN tuning: When the SCAN tuning button is pushed for less than 1. 5 seconds while the CD is being played, the beginning of all the tracks of CDs will be played for 10 seconds in sequence. When the SCAN tuning button is pushed for more than 1. 5 seconds while the CD is being played, the first program in all the CDs will be played for 10 seconds. Pushing the button again during this 10 second period will stop SCAN tuning. If the SCAN tuning button is not pushed within 10 seconds, SCAN tuning moves to the next disc program. CD PLAY selection: To change to another CD already loaded into the player, push the CD play select buttons to . RANDOM (RDM)/REPEAT (RPT): When the RDM/RPT button is pushed while the compact disc is played, the play pattern can be changed as follows: (CDs without MP3 or WMA) compact disc loaded, the compact disc will be ejected. To eject the discs selected by the CD select button, push the EJECT button for less than 1. 5 seconds. To eject all the discs, push the EJECT button for more than 1. 5 seconds. When this button is pushed while the compact disc is being played, the compact disc will come out and the system will turn off. If the compact disc comes out and is not removed, it will be pulled back into the slot to protect it. CD IN indicator: 1 6 CD IN indicator (inserted slot number * - * ) appears on the display when the CD is loaded. AUX (Auxiliary) button: (CDs with MP3 or WMA) The AUX IN jack is located on the audio unit. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computers. Push the AUX button to play a compatible device when it is plugged into the AUX IN jack. CD EJECT: When the CD EJECT button is pushed with the Heater, air conditioner, audio and phone systems 4-21 outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. SAA0451 Type A SAA1779 CD CARE AND CLEANING CD . Always place the discs in the storage case when they are not being used. To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not use a conventional record cleaner or alcohol intended for industrial use. 3. Tuning switch VOLUME control switch SOURCE select switch 4-22 Heater, air conditioner, audio and phone systems SOURCE select switch (Type A) With the ignition switch turned to the ACC or ON position, push the SOURCE select switch to turn the audio system on. Push the switch to change the mode in the sequence of AM, FM, SAT (if so equipped), CD and AUX. If no CD is loaded or AUX is not connected, CD or AUX mode will be skipped. SEEK tuning (radio): Push up or down the tuning switch for more than 1. 5 seconds to seek the next or previous radio station. APS (Automatic Program Search) FF, APS REW (CD or CD changer): Push up or down the tuning switch for less than 1. 5 seconds to return to the beginning of the present program or skip to the next program. [. . . ] Non-genuine (imitation) parts may not provide such built-in safeguards. Also, non-genuine parts often show premature wear, rust and corrosion. Why should you take a chance? In over 40 states, the law says you must be advised if non-genuine parts are used to repair your vehicle. And some states have enacted laws that restrict insurance companies from authorizing the use of non-genuine collision parts during the new vehicle warranty. These laws help protect you, so you can take action to protect yourself. It's your right! If you should need further information visit us at: www. nissanusa. com (for U. S. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NISSAN 2008 ROGUE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NISSAN 2008 ROGUE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.