User manual NILFISK UZ 876

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NILFISK UZ 876. We hope that this NILFISK UZ 876 user guide will be useful to you.


NILFISK UZ 876 : Download the complete user guide (248 Ko)

Manual abstract: user guide NILFISK UZ 876

Detailed instructions for use are in the User's Guide.

[. . . ] This vacuum cleaner is designed to be safe when used to perform cleaning functions as specified. Should damage occur to electrical or mechanical parts, cleaner and / or accessory should be repaired by manufacturer or competent service station before using in order to avoid further damage to machine or physical injury to user. *Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. [. . . ] *Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts. Keep openings free of dust, lint, hair, and anything else that could reduce air flow. *Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. *Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. *If cleaner is not working properly or has been dropped, damaged, left outdoors, or dropped into water, return it to a service center or dealer. BEFORE YOU PLUG IN YOUR CLEANER, check the rating plate located on the cleaners back side to see if the rated voltage agrees within 10% of the voltage available. dO NOT OIL The motor in your new cleaner is permanently lubricated and sealed. Wind the cord beginning at the machine and than store the cord hanging on the machine handle. UZ 877 and UZ 876 are a series of wet and dry suction cleaners wherein the model designation is determined by the capacity of the container - 11 and 15 gallons resepectively. UZ 877- The ends of the handle are inserted into the holes in the base and secured by two socket head capscrews from below. The hooks on top of the motor housing are for carrying the hose and the power cable. Pre-filter, traps coarse waste particles, the pre-filter should be changed regularly. The pre-filter and micro filter are designed for use in both wet pick-up and dry pick-up applications. ) If the machine is used without HEPA-filter this sealing must be fitted on the under side of the motor top. Poly liner bags are avaliable and one is supplied with each new machine. Fold the edge of the opening over the rim of the container, ensuring that the row of Ø5mm holes is inside the container. [. . . ] Fold the edge of the opening over the rim of the container, ensuring that the row of Ø5mm holes is inside the container. The cleaners have two switch knobs on the left of the electrical panel. The cleaner can now be emptied in various ways depending on the type of base fitted. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NILFISK UZ 876




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NILFISK UZ 876 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.