User manual NILFISK SUPER 140.2

[. . . ] Why compromise Super 130. 2 S Super 130. 2 Super 140. 2 Super 145. 2 User Guide 128303529 Super 130. 2 S Super 130. 2 Super 140. 2 Super 145. 2 Printed in China Copyright © 2010 Gerni Index 1 2 3 4 5 6 7 8 9 10 Safety precautions and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before you start using your pressure washer . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operating your pressure washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Fields of application and working methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 After using your pressure washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 EC Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1 Safety Precautions and Warnings Symbols used to mark instructions Before starting up your high-pressure washer for the first time, this instruction manual must be read through carefully. Safety instructions marked with this symbol must be observed to prevent danger to persons. This symbol is used to mark safety instructions that must be observed to prevent damage to the machine and its performance. This symbol indicates tips and instructions to simplify work and to ensure safe operation. Do not let children or people who have not been trained in the use of a high pressure washer nor read the instruction manual operate the machine. [. . . ] Note: Check that the filter is fitted in the water inlet pipe and that it is clean and free from debris. Connect the water hose to the water supply by means of the quick connector (inlet water, max. Turn on the water. NOTE: Connection to the public mains according to regulations. 4. 4 Telescopic handle (Super 130. 2, 140. 2, 140. 2 Plus) The machine (Super 130. 2, 140. 2, 140. 2 Plus) features a telescopic handle. To raise or lower the handle, press the knob and move the handle upwards or downwards. When a click is heard, the handle is in right position. 8 4. 5 Start and stop of the machine (when connected to a water supply) The spray lance is affected by a thrust during operation - therefore always hold it firmly with both hands. Activate the trigger of the spray gun and let the water run until all air has escaped from the water hose. Always adjust the distance and thus the pressure of the nozzle to the surface, which is to be cleaned. Do not cover the machine during operation. Note: If the machine is left or not used for 5 minutes, it must be switched off on the start/stop switch "O" (1): 1. Shut off the water supply and activate the trigger to relieve the machine of pressure. When releasing the trigger of the spray gun, the machine automatically stops. The machine will start again when you re-activate the spray gun. 4. 6 Start the machine (when connected to open containers (suction mode)) The washer can draw water from a rain water tank or bucket as an example. Make sure that the water tank is not placed on a lower level than the machine. Make sure that the water hose is filled completely with water before connecting to the machine. To avoid water spillage, crimp the water inlet hose down in the water and then connect the hose to the machine with the quick coupling and finally uncrimp the water inlet hose. Activate the trigger of the spray gun with lance and nozzle removed and let the water run, until the air has escaped from the water hose and the pump. Wash the car with the car nozzle, which has been optimized for quick and gentle cleaning of enamelled surfaces (the jet is wider and not so sharp). Start at the front of the car and work backwards to avoid water from penetrating by the door mouldings. Use the brush for removal of traffic film which is not removed by the nozzle. Attach the undercarriage nozzle and clean undercarriage and wheel arches. Remove water from the surface of the car with the squeegee on the car brush. On surfaces with moss or algae you may start by applying Neutral detergent with the foam sprayer. Another more effective and quicker method is to use the Patio Cleaner. [. . . ] IMPORTANT: The cleaning tool (11) should only be used when the nozzle is detached!Flush the nozzle backwards with water. 7. 3 Cleaning of machine vents The machine should be kept clean so as to let cooling air pass freely through the machine vents. 14 7. 4 Greasing of couplings To ensure easy connection and that o-rings do not dry up, the couplings should be greased regularly. 8 Trouble Shooting Please ensure that you check the following before contacting the Gerni service organization: Symptom Machine refuses to start Cause Machine not plugged in Defective socket Fuse has blown Defective extension cable Pump sucking air Low voltage or low temperature Fuse has blown Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Fuse blows Fuse too small Recommended action Plug in machine. Check that the mains voltage corresponds to specification on the model tag. Clean the nozzle (see section 7. 2) Change to an installation higher than the amp. [. . . ]