User manual NILFISK SR 1000S P

[. . . ] The undersigned certify that the above mentioned model is produced in accordance with the following directives and standards. Contrôler la hauteur du sol des balais latéraux, en procédant comme suit : ­ porter la machine sur un sol plat et baisser les balais latéraux ; ­ en gardant la machine en position d'arrêt, tourner les balais latéraux pendant quelques secondes ; ­ arrêter et soulever les balais latéraux, puis déplacer et arrêter la machine ; ­ contrôler que la trace laissée par les balais latéraux est, en extension et orientation, comme indiqué dans la figure (1 et 2, Fig. The purpose of this Manual is to provide the operator with all necessary information to use the machine properly in a safe and autonomous way. It contains information about technical data, operation, storage, maintenance, spare parts and safety. [. . . ] Upon delivery carefully check that the machine and its packing have not been damaged during transportation. In case of visible damages, keep the packing and have it checked by the Carrier that delivered it. Please check that the following items have been supplied with the machine: ­ Sweeper User Manual ­ Petrol Engine Manual ­ Spare Parts List ­ No. This sweeper has been designed and built to clean (by sweeping and vacuuming) smooth and solid floors, in civil and industrial environments and to collect dust and light debris under safe operation conditions by a qualified operator. Steering wheel Control panel Vacuum activation/deactivation lever Side broom lifting/lowering lever Forward/reverse gear pedal Service brake pedal Parking brake lever (it acts on the front wheel) Brake engaged Brake disengaged Front skirt lifting pedal Can holder Hood Rear wheels on fixed axle Front driving and steering wheel Right side broom Left side broom Main broom Left side skirt Right side skirt Front skirt Rear skirt Hopper Hopper hook Hopper handle Main broom left door Main broom height left adjusting knob Main broom height right adjusting knob Main broom right door Main broom right door mounting screws Pivoting light (always on when the ignition switch is turned to "I" position) (optional) Driver's seat with safety microswitch Additional hole for manual vacuum system (optional) Adjustable steering column Working light (optional) Side broom height adjusting knob Seat longitudinal position adjusting lever Manual vacuum system (optional) Fuel tank cap Fuel tap and engine choke lever compartment Engine exhaust pipe Engine ventilation grid Side broom height adjusting knob ring nut Forward, backward, front, rear, left or right are intended with reference to the operator's position, that is to say on the driver's seat with the hands on the handlebar (1, Fig. Left control panel Ignition switch Hour counter Horn switch Filter shaker switch Manual vacuum system switch (optional) Working light switch (optional) Emergency push-button Control panel mounting screws Right control panel Steering column inclination adjusting lever Serial number plate/technical data/EC certification Engine model Engine serial number Hood (open) Hood support rod Petrol engine Ignition spark plug Engine choke lever Fuel tap Fuel tank Fuel tank cap Engine air filter Accelerator lever (adjusted by the Manufacturer: do not tamper with it nor use it to change the engine speed!) Engine oil filler/level check plug Engine oil drain plug Engine belt Main broom belt Main broom drive pulley Vacuum fan Engine silencer Batteries Battery caps Lamellar fuse box (accessories) Drive system thermal fuse Starter and dynamo Manual vacuum system (optional) Switch for machine pushing Battery installation diagrams Dynamo fuse Fuel tap Engine choke lever General Machine length Machine width (without side brooms) Machine height (steering wheel with knob) Cleaning width (with side brooms) Main broom size Side broom size Front driving and steering wheel Rear wheels Total machine weight (with batteries) Maximum forward/reverse speed Gradeability Hopper capacity Cleaning rate (with main broom) Cleaning rate (with main and side brooms) Sound pressure level (LpA) Batteries Battery voltage Starter batteries Petrol engine Make Model Displacement Engine power Specific fuel consumption Values 1, 255 mm 795 mm 1, 173 mm 1, 000 mm Ø 265 mm x 600 mm Ø 420 mm Ø 200 x 50 mm Ø 250 x 50 mm 284. Disengage the parking brake according to the following procedure: ­ Press the pedal (6, Fig. Drive the machine to the working area, by keeping the hands on the steering wheel and pressing the pedal (5, Fig. C) on the front side to move forward and on the rear side to move backward. The drive speed can be adjusted from zero to maximum speed by increasing the pressure on the pedal (5, Fig. C) is equipped with a safety sensor, which allows the machine to be driven by pressing the pedal (5, Fig. C) and, if it is necessary for an easier access to the machine, push the lever (11, Fig. Only in case of very low temperatures, turn the engine choke lever (1, Fig. W) to closed position (2) by introducing your hand into the compartment (37, Fig. The side brooms do not rotate when they are lifted, but they rotate when they are lowered. Engage the parking brake according to the following procedure: ­ Press the pedal (6, Fig. C) should be dumped after each working period and whenever it is full (see the procedure in the next paragraph). The engine is equipped with a warning system to prevent damages to the engine itself in case the oil quantity in the carter is insufficient. Before the oil level goes below the safety limit, the warning system automatically stops the engine. Engage the parking brake according to the following procedure: ­ Press the pedal (6, Fig. Avoid stopping for a long time with the machine in the same position and the brooms rotating: this could create unwanted marks on the floor. [. . . ] NOTE Besides the standard paper filter, polyester filters are also available. In an appropriate outdoor area, clean the filter by shaking it on a level and clean surface, tapping the side (1, Fig. Complete the cleaning by using compressed air (3) at maximum 6 bars, blowing only from the side protected by the wire gauze (2), at a minimum distance of 30 cm (see the figure). According to the filter type, observe the following cautions: ­ Paper filter (standard): Do not use water or detergents to clean it; the filter can be damaged. [. . . ]