User manual NILFISK MV 4500

[. . . ] The undersigned certify that the above mentioned model is produced in accordance with the following directives and standards. Spazzatrice a 3 spazzole semplice/ Sweeper with simple third broom The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal. Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. [. . . ] To adjust the driver's seat (26, Fig B) horizontally, turn the lever (28) outwards until a comfortable position is reached, then release the lever. To increase the springing turn the knob counter-clockwise, to decrease the springing turn the knob clockwise (see the silk-screen printing on the knob). To adjust the tilting of the seatback (26, Fig B), turn the lever (30) upwards until a comfortable position is reached, then release the lever. When it is required to work under the cargo box/hopper/water tank, lift it completely by pressing the upper part of the cargo box/ hopper/water tank lifting switch (24, Fig. G) with the lever (2) and lift the cargo box/hopper/water tank enough to install the support rod (1, Fig. The cargo box/hopper/water tank can be lowered by pressing the lower part of the switch (24, Fig. In case of general failure (dashboard not power supplied), the cargo box/hopper/water tank can be lowered by loosening the unlocking screw (4, Fig. When the cargo box/hopper/water tank is lowered, tighten the screw and the locknut. The machine is equipped with a high-pressure water system to be used for washing the machine or other purposes. Turn on the water pump by pressing and releasing the lower part of the switch (28, Fig. ) properly, when performing cleaning procedures using compressed air or water gun. When necessary, empty the dust control system water tanks (2 and 3, Fig. When near a water plug, use a hose and fill the tanks through the filler plugs (10, 11, 12, 13, Fig. NOTE The differential lock remains effective until a maximum speed of 6 km/h. Check that the machine is on a solid and level ground, especially if the cargo box/hopper/water tank is full. Check that the machine cannot move with one wheel lifted (the parking brake operates only on the front wheels). if necessary keep the machine stationary by placing wedges on the wheels contacting the ground. L) carefully by using the lever (9) and lift the wheel (4) until it is slightly detached from the ground. L) carefully by using the lever (10) and lift the wheel (8) until it is slightly detached from the ground. If it contains a small quantity of material, it is not necessary to empty it. Moving the machine on the trailer bed To move the machine on the trailer bed, perform the following procedures: 1. CAUTION If the lift truck is placed on different points, the machine can get unbalanced. [. . . ] The oil and filters should be disposed of properly according to the environmental laws in force. ) properly, when performing cleaning procedures using compressed air or water gun. Drive the machine on a solid and level ground, then engage the parking brake (3, Fig. The coolant line is pressurised; do not perform any check until the engine has cooled down and, even if the engine is cold, the expansion tank plug (22, Fig. [. . . ]