User manual NILFISK GD 910

[. . . ] Before using the vacuum cleaner make sure that the voltage shown on the rating plate on the vacuum cleaner corresponds with the main voltage. Specifications and details are subject to change without prior notice. [. . . ] If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. The plug must always be removed from the socket outlet before starting any service or repair work of the machine or the cable. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. No changes to the mechanical, electrical or thermal safety devices must be made. This machine is equipped with a thermal cut-out to protect the motor and other vital machine parts from overheating. Should the machine cut out, you will have to wait at least 5-10 minutes for it to automatically reset. While you are waiting, switch the machine off and unplug it, then check the hose, dust bag and filters to be sure that nothing is blocking the flow of air through the machine. The equipment meets the requirements in EN 61000-3-11, and connection to the public mains is possible following consultation with the power supplier. The equipment may only be connected to the mains with a network impedance that is below 0. [. . . ] Use of non original dust bags or non original filters can cause restricted air flow which may lead to machine overload. This appliance conforms with EC-Directive 89/336/EEC, 93/31/EEC, 73/23/EEC, 93/68/EEC. [. . . ]