User manual NILFISK C-PG 130.2-8 P

[. . . ] Cables on drums should always be completely unwinded to prevent the cable from overheating. 3 Extension cables should be of a watertight construction and comply with the below-mentioned requirements for length and cable dimensions. 1. 0 mm² 1. 5 mm² 2. 5 mm² max. 12. 5 m 20 m 30 m Water connection Connection to the public mains according to regulations. This high pressure washer is only allowed to be connected with the drinking water mains, when an appropriate backflow preventer has been installed, Type BA according to EN 1717. [. . . ] Mount the high pressure hose on the outlet (3). 6 4. 2 Mounting of spray lance and Click & Clean nozzles 1. Push the spray lance (6) into the spray gun (7) and screw it on. Note: The spray lance (6) has a built-in low pressure nozzle that can be used for flushing away dirt. Warning: When attaching the Click & Clean nozzles, the pawl on the side of the spray lance should come out again. Note: The Tornado® PR nozzle and the foam sprayer feature a swivel lock, which must be positioned in the hole in the Click & Clean spray lance. Press the pawl to detach the Click & Clean nozzle. 6 7 4. 3 Water connection An ordinary 1/2" garden hose of min. Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrating the machine. Note: Check that the filter is fitted in the water inlet pipe and that it is not clogged up. Connect the water hose to the water supply by means of the quick connector (inlet water, max. Turn on the water. NOTE: Connection to the public mains according to regulations. 7 4. 4 Start and stop of the machine (when connected to a water supply) The spray lance is affected by a thrust during operation therefore always hold it firmly with both hands. Activate the trigger of the spray gun and let the water run until all air has escaped from the water hose. Always adjust the distance and thus the pressure of the nozzle to the surface, which is to be cleaned. Do not cover the machine during operation. Adjust the distance (pressure) to the quality of the joints and the wood. Patio Cleaner can also be used on vertical surfaces. Rims, aluminium Rim brush, auto nozzle, atomizer, Alu Cleaner Powerspeed® nozzle, Stone & Wood Cleaner, Patio Cleaner Wood Cleaner Garden brush Flagstones, concrete floors and other hard surfaces Garden furniture, wood Brickwork, Powerspeed® Wood work nozzle, Stone & Wood Cleaner, Patio Cleaner Gutter Cleaning of drain pipes, outlets, down pipes etc. ½ m (to mark) into a tube or drain and activate the trigger of the spray handle. The nozzle opening turning backwards will pull the cleaner through the tube. The nozzle will break down the , , plug" and flush the dirt backwards. Mount the water/sand blasting equipment and rust and paint is efficiently and quickly removed. Beware not to damage the surface to be sandblasted. Water/sandblasting equipment Greenhouse Garden tools, lawn mover Tornado® PR nozzle Wash with high pressure and maybe a brush. Adjust the length of the screws and size of rawlplugs to the type of wall. On the wall hook garden/rim brush (a) foam sprayer (b), Click & Clean brush (c) and Click & Clean nozzles (d) can be stored. Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice: Wash out water hose, high pressure hose, spray lance and accessories before mounting. [. . . ] that the product has not been exposed to abuse such as knocks, bumps or frost. that the high pressure washer has not been used for rental nor used commercially in any other way. Repairs under this guarantee include replacement of defective parts, exclusive of packing and postage/carriage. The machine should be forwarded to one of the service centres of the Nilfisk organisation with description/specification of the fault. malfunctions due to Causes mentioned in section Troubleshooting Chart of the instruction manual). [. . . ]