User manual NILFISK ATTIX 7

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NILFISK ATTIX 7. We hope that this NILFISK ATTIX 7 user guide will be useful to you.


NILFISK ATTIX 7 : Download the complete user guide (2626 Ko)

You may also download the following manuals related to this product:

   NILFISK ATTIX 7 (2578 ko)
   NILFISK ATTIX 7 (2575 ko)
   NILFISK ATTIX 7 (2619 ko)
   NILFISK ATTIX 7 (2538 ko)
   NILFISK ATTIX 7 (2572 ko)
   NILFISK ATTIX 7 (2598 ko)
   NILFISK ATTIX 7 (2610 ko)
   NILFISK ATTIX 7 (2650 ko)
   NILFISK ATTIX 7 (2572 ko)
   NILFISK ATTIX 7 (2577 ko)
   NILFISK ATTIX 7 (2623 ko)
   NILFISK ATTIX 7 (2596 ko)
   NILFISK ATTIX 7 (2571 ko)
   NILFISK ATTIX 7 (2582 ko)
   NILFISK ATTIX 7 (2619 ko)
   NILFISK ATTIX 7 (2577 ko)
   NILFISK ATTIX 7 (2593 ko)
   NILFISK ATTIX 7 2004-10-01 (2624 ko)

Manual abstract: user guide NILFISK ATTIX 7

Detailed instructions for use are in the User's Guide.

[. . . ] 146 Kezelsi utasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Instrucciones de manejo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Instrues de operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Before sucking in liquids, remove the filter bag and check the performance of the floater (see section 7. 2. 3). Always pull out the mains plug before cleaning and servicing the vacuum clea-ner. Only carry out maintenance work described in the operating instructions. For further maintenance or repair work and the replacement of a faulty power cord please contact the Alto service department or an authorized Alto workshop. Electrical connections by the manufacturer or higher quality ones (see section 9. 4 "Technical data"). It is recommended that the vacuum cleaner is connected via a residual current circuit breaker. This device stops the supply of electricity if the leakage current to earth exceeds 30 mA for 30 ms or it has an earth tester circuit. When using an extension cord, check the minimum cross-sections of the cable: Cable length m up to 20 20 to 50 Cross section mm2 1. 5 2. 5 Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension cord so that protection class is maintained. Never spray water on to the upper section of the vacuum cleaner: danger for persons, risk of short-circuiting. Observe the latest edition of the IEC regulations. Check the rated voltage of the vacuum cleaner before connecting it to the mains supply system. Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply. To reduce the amount of foam, use foam killer Alto Foam Stop (see section 9. 5 "Accessories" for order number). 1) Option depending on model 19 ATTIX 750-01/550-11 MOBIL/550-21/590-21 ATTIX 12 GALLON / ATTIX 12 GALLON RDF ATTIX EC 12 GALLON AS/E 6 After finishing work 6. 1 Switching the vacuum cleaner off and storage 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. After picking up liquids: Store the upper section of the cleaner separately so that the filter element can dry. Have carbon brushes changed by Alto Service. > Self-acting carbon brush is worn 1) Motor does not run in automatic mode1) > Power tool is defective or not connected properly. Check that the power tool works or that the plug is inserted correctly. Note that minimum power rating is P>40W 22 1) Option depending on model ATTIX 750-01/550-11 MOBIL/550-21/590-21 ATTIX 12 GALLON / ATTIX 12 GALLON RDF ATTIX EC 12 GALLON AS/E Fault Reduced suction power Cause > Suction power selected with suction power control1) is to low. > Seal/tank rim between the upper section of the cleaner and the dirt tank is dirty/defective. > Filter element is clogged. Remedy Set suction power in accordance with section 4. 2. 3. Clean/replace seal. See section 7. 2. 2 "Replacing the filter bag". See section 4. 3 "Cleaning the filter element" and 7. 2. 3 "Replacing the filter element". Use a suitable extension cord (see section 9. 4 "Technical data"). [. . . ] Nilfisk-ALTO Division 40 Loyang Drive Singapore 508961 Tel. : +65 6 759 9100 Fax: +65 6 759 9133 E-mail: sales@nilfisk-advance. com. sg SPAIN Nilfisk-ALTO Division of Nilfisk-Advance S. A. 10 08302 Matar Tel. : +3 4 902 200 201 Fax: +34 93 757 8020 E-mail: mkt@nilfisk-advance. es SWEDEN ALTO Sverige AB Member of Nilfisk-Advance Group Aminogatan 18, Box 4029 431 04 Mlndal Tel. : +46 31 706 73 00 Fax: +46 31 706 @nilfisk-alto. se www. nilfisk-alto. se TAIWAN Nilfisk-Advance Taiwan Branch No. 5, Wan Fang Road Taipei Tel. : +886 227 002 268 Fax: +886 227 840 843 THAILAND Nilfisk-Advance Co. 89 Soi Chokechai-Ruammitr Viphavadee-Rangsit Road Layao, Jatuchak, Bangkok 10900 Tel. : +66 2 275 5630 Fax: +66 2 691 4079 TURKEY Nilfisk-Advance Profesional Temizlik Ekipmanlari Tic. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NILFISK ATTIX 7




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NILFISK ATTIX 7 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.