User manual NILFISK 118 EXP EXPLOSION PROOF

[. . . ] Make sure that the grounding path between the terminal for connection of the grounding conductor of the power cord and parts of the Vacuum is assured. Using the tester, check for continuity between each connection of the vacuum cleaner (example: tool to wand, wand to hose, hose to machine, etc) If the problem can not be corrected refer the unit to an AUTHORIZED SERVICE CENTER ONLY. [. . . ] Secure the Filter "C" to the ring "F" using the ties "G" supplied in the new filter kit (Figure 5). Place the new filter assembly inside the filter chamber and reconnect the assembly using the split pin "D" (Figure 5). Mount the motor head "B" onto the machine and secure in place with the latches "A" (Figure 3). Dispose of the old filter in accordance with all federal, Separate disc "A" from gasket "B" and remove disc/filter assembly from the vacuum machine. Dispose of the old filter in accordance with all federal, state and local regulations. The electric motors used in the Nilfisk Explosion Proof vacuum Cleaner model 118EXP have been listed by Underwriters Laboratories Inc. In guide PTDR file E25653, for use in the following hazardous locations classifications: Warning: Do not use this or any other Nilfisk CFM vacuum for the purposes of cleaning or extracting fuel residues from airplanes or ships. NOTE: The motors used in this vacuum cleaner are designed for use in commercial and industrial vacuum equipment which employs filters to remove dirt from the airstream before reaching the motor's vacuum fans. Do not operate the vacuum cleaner without the proper filter system installed. Cord plug installed by customer, shall be suitable for the hazardous locations area that vacuum is installed in. If the vacuum cleaner should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electrical shock. This vacuum cleaner must be properly installed and grounded in accordance with all local codes and ordinances. [. . . ] Some states do not allow exclusion of implied warranties or limitations on how Long an implied warranty lasts so the above exclusions or limitation of implied warranties may not apply. Some states do not allow exclusion or limitation of incidental or consequential damages so the above exclusion or limitation of incidental or consequential damages may not apply. [. . . ]