User manual NEWONE CR 120

[. . . ] A station with a weak signal can be set manually by repeatedly pressing or . NOTE: During the search operation, the sound level is automatically muted. Automatic storage: Press and hold for few seconds and the unit will automatically save the first 20 FM stations. [. . . ] CARACTERSTICAS TCNICAS ALIMENTAO: To fall asleep with the radio, Press then to select 120-90-60-30-15-10 or 5 minutes of listening. 5 -108 MHz DIMENSES DO APARELHO:120(L) X 67(W) X 77(H) mm INFORMAES 1 This function wakes you up after a short period of time. 5-108MHz 120(L) X 67(W) X 77(H) mm CAUTION: To reduce the risk of electric shock, do not open the device, there is no party inside for the user. The lightning with the arrow symbol in the triangle is a warning sign alerting the user to "dangerous voltage" inside the unit . The exclamation point in the triangle is a warning sign alerting the user of important instructions accompanying the product. Dimmer light intensity of the screen SNOOZE Interval alarm repetition POWER SUPPLY 7. Do not attempt to recharge the batteries, they can catch fire or explode. BACKUP SYSTEM: All settings are memorized, however, the clock time could occasionally need to be readjusted. In case of power failure, if backup batteries are not installed, the screen will flash to indicate this power failure and the necessity to redo your settings. sETTING THE TIME FR Lire attentivement les instructions avant de faire fonctionner l'appareil. FONCTION SOMMEIL IMPORTANT - The Marking plate is located at the bottom of the device. - Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation. - Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc. - Do not place naked flame sources, such as lighted candles on the apparatus. [. . . ] If in the future, you need to get rid of this product, please note that Waste electrical products should not be disposed of with household waste. In standby mode, press and hold button, the display will flash, set the time with HR. NOTE: If during the adjustment time no key is activated in 9 seconds, the current display will be automatically stored. [. . . ]